Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: rns510 and arm rest mdi...poor sound quality when using mdi  (Read 1279 times)

Offline Leigh200sx

  • Always Involved
  • ****
  • Thank You
  • -Given: 7
  • -Receive: 6
  • Posts: 364
    • Email
rns510 and arm rest mdi...poor sound quality when using mdi
« on: February 28, 2014, 12:24:03 pm »
Hi I've tried searching and found a few answers but just to clarify Il ask here to... Right last weekend I fitted a rns510,brilliant and much better than my mfd2 which is now in her gt tdi. Yesterday I fitted a arm rest mdi and it's again brilliant, every thing works and all displays on my highline but the sound quality from mdi is piss poor... I've tried cd and sd card and there fine so to is hdd and radio...any help on to finding  a solution please
Logged

Offline Luka

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 32
  • Posts: 388
Re: rns510 and arm rest mdi...poor sound quality when using mdi
« Reply #1 on: February 28, 2014, 01:01:58 pm »
Have a look here mate:

http://www.my-gti.com/688/volkswagen-media-device-interface-mdi-retrofit

In particular, the installation instructions and pin locations.
Logged
Sold - 2006 Tornado Red GTI 3dr

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: rns510 and arm rest mdi...poor sound quality when using mdi
« Reply #2 on: March 02, 2014, 07:47:14 pm »
check the settings on the rns

you want to change aux to low
Logged
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline Leigh200sx

  • Always Involved
  • ****
  • Thank You
  • -Given: 7
  • -Receive: 6
  • Posts: 364
    • Email
Re: rns510 and arm rest mdi...poor sound quality when using mdi
« Reply #3 on: March 04, 2014, 09:37:34 pm »
Quote from: Eddie-NL on March 02, 2014, 07:47:14 pm
check the settings on the rns

you want to change aux to low

Done this and it's still terrible..
Logged

Offline SI-R32

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 8
  • -Receive: 125
  • Posts: 1001
Re: rns510 and arm rest mdi...poor sound quality when using mdi
« Reply #4 on: March 04, 2014, 09:47:48 pm »
are you sure the 3 wires that go into the 510 are the correct way round, when i did mine a very long time ago i found i got them wrong and had to have a little swap around, all way a lot better after, might be worth a try.

Logged
Loads of extra's and retro fits.

Offline GLIDN

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 12
  • -Receive: 19
  • Posts: 552
Re: rns510 and arm rest mdi...poor sound quality when using mdi
« Reply #5 on: March 06, 2014, 09:40:34 pm »
going from RCD300/500 t RCD310/510/RNS510.

Requires two of the wires to be swapped around while the 3rd wire needs to be relocated to a new pin.
Logged
Pages: [1]   Go Up
« previous next »