Make a donation

Author Topic: Avoid front wing rust, remove the sponge on inside of the wing  (Read 2100 times)

Offline Melkiy

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 137
Well started getting proper rusty on one side, question "why?"
Big massive sponge on inside full of water even tho I didn't drive it for a week.
Care for your golf? Don't want rust? Take your arch cover off and pull the stupid sponge out before it gets to late.

Well rolled arches and what I fined there wasn't very nice  :confused:
« Last Edit: March 01, 2014, 03:11:13 pm by Melkiy »

Offline sootpig

  • Always Involved
  • ****
  • Thank You
  • -Given: 11
  • -Receive: 13
  • Posts: 264
    • Email
Re: Avoid front wing rust, remove the sponge on inside of the wing
« Reply #1 on: March 01, 2014, 03:41:51 pm »
I also shaved a few mm off the outside edge of the arch liners. This stops them rubbing the arch which lets the moisture from the sponge attacking the metal
 Don't forget to empty the sill behind the mud flap location  :happy2: I do this every few months especially at this time of year

Offline Zseth

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 34
  • 05 GTI DSG
    • Email
Re: Avoid front wing rust, remove the sponge on inside of the wing
« Reply #2 on: March 01, 2014, 09:57:12 pm »
Is it as simple as just pulling the sponge out or do you have to cut it out etc? Do you suggest trimming the arch liner even if sponge is completely removed?

Thanks

Offline Melkiy

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 137
Re: Avoid front wing rust, remove the sponge on inside of the wing
« Reply #3 on: March 02, 2014, 04:31:42 pm »
I also shaved a few mm off the outside edge of the arch liners. This stops them rubbing the arch which lets the moisture from the sponge attacking the metal
 Don't forget to empty the sill behind the mud flap location  :happy2: I do this every few months especially at this time of year

Dot that as well, started getting rust on the rail under wing. Thank god there was just small mark coming so I took the cover off and omg it was full  :surprised: Jet wash did well. I think ill car the bottom of it off so it won't stay there anymore as at the moment it's like a pocket for dirt to stay :)

Offline Melkiy

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 137
Re: Avoid front wing rust, remove the sponge on inside of the wing
« Reply #4 on: March 02, 2014, 04:33:12 pm »
Is it as simple as just pulling the sponge out or do you have to cut it out etc? Do you suggest trimming the arch liner even if sponge is completely removed?

Thanks

It's up to you,but best take that sponge out  :)
« Last Edit: March 02, 2014, 04:35:10 pm by Melkiy »

Offline callis

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 10
  • Posts: 210
    • Email
Re: Avoid front wing rust, remove the sponge on inside of the wing
« Reply #5 on: March 02, 2014, 05:20:22 pm »
Pics paint a thousands words...................
05 GTI 5 Door, sunroof, met paint, 18" monza, Leather Anthacite, front centre armrest, xenon headlights, Lux pack 2, Sensors, Winter Pack.