RS3 370mm Brakes and Space

[Alzak]

Hi All

Will 370mm discs and brakes from RS3 fit behind 18Inch alloys in Seat Leon Fr ?

[scopes]

Think you need the ttrs discs, as the rs3 ones needs rs3 bearings !

[danishmkvgti]

Think you need the ttrs discs, as the rs3 ones needs rs3 bearings !

That is correct, 10mm wider bearings to my knowledge, you need the TT-RS discs to get it to work

[dan930]

U will need ttrs discs
Part no 8j0.615.301E

[scopes]

After that you could still need to run 10 mm spacers on the front ! 

[Alzak]

Is there any visual difference between RS3 discs and TTRS ?

[scopes]

Part numbers !

[b9rgo1234]

I had TTRS brakes fitted to my Leon with 18" Seat Sport BBS alloy 7.5" ET51 and had to use a 12mm spacer.
The caliper actually rubs on the inside of the alloys though  
I plan on using the calipers again but with the fitting kit so I can use TTS 340mm discs.

[Banham]

Those look amazing   May have to  trade my r32's in for some rs3 calipers.

[Alzak]

I had TTRS brakes fitted to my Leon with 18" Seat Sport BBS alloy 7.5" ET51 and had to use a 12mm spacer.
The caliper actually rubs on the inside of the alloys though  
I plan on using the calipers again but with the fitting kit so I can use TTS 340mm discs.

I have oryginal FR 18Inch alloys and I believe they have offset ET45 ...

You mantioned some fitting kit do you have any link where I can see it ?

[dan930]

I had TTRS brakes fitted to my Leon with 18" Seat Sport BBS alloy 7.5" ET51 and had to use a 12mm spacer.
The caliper actually rubs on the inside of the alloys though  
I plan on using the calipers again but with the fitting kit so I can use TTS 340mm discs.

I have oryginal FR 18Inch alloys and I believe they have offset ET45 ...

You mantioned some fitting kit do you have any link where I can see it ?

Aks do the fitting kit for rs3/ttrs calipers fitting to r32 discs or if u want a bigger setup then u can go for the daveb ttrs discs with fitting kit,benefits of the daveb kit is that the discs sits inner(around 4-5mm)& the disc is 32mm compared to 34mm,so u might can get away on not using spacers..not cheap though

[pd9264]

I got them behind my monzas with a 10mm spacer

[N8KOW]

So will that be similar to Pescaras then?

[GTI.Dav]

I risked 12.5mm spacers behind my pescaras and they just, just fitted!! Had to remove the wheel weights because they were rubbing on the caliper.

[dan930]

I'm thinking of ttrs calipers with ttrs 370mm discs so basically the ttrs setup on my golf R...been reading on American forums that I will need a 10mm spacer to clear the calipers if im running on oem 19x8 tallies but I'm worried that I might get rubbing as I'm lowered on H&R springs...