Thought I would post here rather than having it just attached to my other topic which is around Colour Coding.
I am trying to remove my whole Rear Bumper
I have undone all three torx screws in the arches on either side and also removed the lights fine and the torx screws underneath these. Also removed the 2 torx screws underneath near each wheels where it had some of the inner arch attached.
I am however hitting problems with the ones in the pics below as in the 2 screws in the arches I cannot see what torx or type they are and when get a torx slotted in it just seems to mangle the screw so help here please.
Also the 2 underneath in the pics, can get to them fine but they turn slowly with massive amount of pressure on them and do not seem to be getting loose so am I doing something wrong here