Front plate magnets

[SurreyED30]

^^^^ Get some N35 magnets. 20mm x 3mm is more than fine. Youll need at least 12 (I used 16), 6 or 8 for the plate and also 6 or 8 for the reverse side of the grill.

do you mean these martin
http://www.ebay.co.uk/itm/10-LARGE-and-STRONG-Neodymium-disc-magnets-20mm-dia-x-3mm-N35-craft-fridge-diy-/181327418684?pt=LH_DefaultDomain_3&hash=item2a37f4d53c

[MC71]

^^^^ Thems the ones I haz, 10 might not be enough though. 

[SurreyED30]

do they have a stickie side? or how did you fix them too you plate and grill?
 

[Simon_2.0t]

do they have a stickie side? or how did you fix them too you plate and grill?
 

Araldite them to behind the grill and on the plate mate.

Si

[SurreyED30]

do they have a stickie side? or how did you fix them too you plate and grill?
 

Araldite them to behind the grill and on the plate mate.

Si

happy days, thanks mate

[Adam-golf]

^^^^ Get some N35 magnets. 20mm x 3mm is more than fine. Youll need at least 12 (I used 16), 6 or 8 for the plate and also 6 or 8 for the reverse side of the grill.

I went for 20 

[arris]

8 on each must be mad.

Although I'm sure mine are 5mm I only have 5 and it's hard enough to pull off 

[SI-R32]

^^^^ Get some N35 magnets. 20mm x 3mm is more than fine. Youll need at least 12 (I used 16), 6 or 8 for the plate and also 6 or 8 for the reverse side of the grill.

I went for 20 

i went for 15 on grill and 15 on plate in the R32, don't move an inch!!

[Adam-golf]

Better to be safe then sorry 

[mk5ash]

just ordered myself a set 

[Scoobykiller]

Old topic but...
I ordered some 20mm x 3  mm n52 magnets 5 for plate will tigerseal it on and 5 for behind