Make a donation

Author Topic: Jetta fog light surround  (Read 867 times)

Offline Sjw_Vw

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 5
  • Posts: 430
    • Email
Jetta fog light surround
« on: March 14, 2014, 12:03:53 pm »
How do I remove the fog light surround on my mk5 Jetta?? I've tried searching, But with no luck. Thanks :happy2:
Instagram - sjw_vw. Updated all the time :)

Offline woahnowboys

  • Always Involved
  • ****
  • Thank You
  • -Given: 4
  • -Receive: 6
  • Posts: 308
    • Email
Re: Jetta fog light surround
« Reply #1 on: March 14, 2014, 12:10:29 pm »
Front fog light grille?
If so, it's just one screw, and then pulls off, sometimes can be quite hard to pull off, and quite scary.. :signLOL:

'87 MK1 Cabby - To be 20vT'd.
MK5 Daily.

Instagram - woahnowboys

Offline Stanipkiss

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 4
  • -Receive: 15
  • Posts: 831
Re: Jetta fog light surround
« Reply #2 on: March 14, 2014, 12:41:06 pm »
woah is right Shane, pull hard at the screw end as the outside has a tab to locate when you push it back in place.

Mk5 Jetta 2.0l Tdi 140 se Apex RDX coilovers, BBS VZ003, Skyline tails, Genuine Xenons more to come

Offline Sjw_Vw

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 5
  • Posts: 430
    • Email
Re: Jetta fog light surround
« Reply #3 on: March 14, 2014, 03:48:32 pm »
Ahh right! Thaanks alot guys :happy2:
Instagram - sjw_vw. Updated all the time :)

Offline OSB

  • Always Involved
  • ****
  • Thank You
  • -Given: 32
  • -Receive: 17
  • Posts: 406
Re: Jetta fog light surround
« Reply #4 on: March 16, 2014, 07:37:06 am »
I don't know if you have managed to get your grills off yet.
I had real trouble getting mine off - one side eventually, with a lot of tugging. The other side would not budge until I used a trim removal tool (bit like a screwdriver with the end bent up a bit) working my way along and freeing each 'tab' in turn by levering it out of the retaining hole. I also gently warmed the plastic with a hair dryer to give more flexibility.
I put a smear of silicone grease on each tab and hole to make life easier to replace and take off in future.

Best of luck buddy!

Offline Sjw_Vw

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 5
  • Posts: 430
    • Email
Re: Jetta fog light surround
« Reply #5 on: March 16, 2014, 07:04:15 pm »
I don't know if you have managed to get your grills off yet.
I had real trouble getting mine off - one side eventually, with a lot of tugging. The other side would not budge until I used a trim removal tool (bit like a screwdriver with the end bent up a bit) working my way along and freeing each 'tab' in turn by levering it out of the retaining hole. I also gently warmed the plastic with a hair dryer to give more flexibility.
I put a smear of silicone grease on each tab and hole to make life easier to replace and take off in future.

Best of luck buddy!
Thanks, OSB. No I haven't taken them off yet. Going to do it next weekend :)
Instagram - sjw_vw. Updated all the time :)