Make a donation

Author Topic: MFSW - Connectors - Do i need anything else?  (Read 5123 times)

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: MFSW - Connectors - Do i need anything else?
« Reply #15 on: August 19, 2009, 07:18:05 pm »
sell me your highline cluster!!!!!!!!   :P :jumpmove:
how did you get the menu to work?
 :drinking:

I think it's in the coding for the steering controller.  Can't remember it exactly but one will make the buttons on the end of a left stalk work and the other makes the steering wheel button work.

The VCDS coding window will tell you.
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline Deako

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 38
  • -Receive: 44
  • Posts: 1655
  • Eat, Sleep....VAG
Re: MFSW - Connectors - Do i need anything else?
« Reply #16 on: August 20, 2009, 01:48:44 pm »
I dont know. It just works.  :driver:

I didnt do any coding. Just fitted them and its fully functional.
« Last Edit: August 20, 2009, 01:57:02 pm by Deako »
#1493

Offline edd666999

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 24
  • -Receive: 89
  • Posts: 2730
    • Email
Re: MFSW - Connectors - Do i need anything else?
« Reply #17 on: September 26, 2009, 10:45:47 pm »
How much does it cost to buy the "highline" (not sure if thats what it is, its the full size screen rather than one thats split in 2) am i right in thinking im going to have to buy a new insrument cluster or can i just get the screen?

thanks!

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: MFSW - Connectors - Do i need anything else?
« Reply #18 on: September 27, 2009, 03:57:18 pm »
Yes you need the full dash insert.
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline QD MBE

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 15
  • -Receive: 102
  • Posts: 2497
Re: MFSW - Connectors - Do i need anything else?
« Reply #19 on: October 07, 2009, 08:11:46 pm »
You'll need an proper MFSW Keith it was just the DSG wheel had the set up that fortunatley the buttons could be retrofitted afterwards,  The standard S/wheel can not be retro fitted with the buttons.  But the good thing is the standard gti wheel still gets a good price on ebay roughly £100+ and you may pick a good gti/r32 mfsw up for around £150+ nothing else is needed.

Darren

So let me get this............

If i find a MFSW, i can retro fit it, and with some VAGCOM Godcoding to the SW controller it will work?

 :confused: