Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Xenon Retrofit Bi-Xenon Wire through bulkhead  (Read 1808 times)

Offline diazbtn

  • Taking part
  • ***
  • Thank You
  • -Given: 8
  • -Receive: 0
  • Posts: 35
Xenon Retrofit Bi-Xenon Wire through bulkhead
« on: April 26, 2014, 11:33:42 am »
Hey people

where's the easiest place to put the wire through?? I opened the bonnet, took one look n freaked out........had a quick search n also looked at http://www.myturbodiesel.com/threads/hid-retrofit-on-mk5-jetta-part-2.2293/ and just wondered where people put the wire...

thanks for the help
Logged

Offline omeydz

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 3
  • -Receive: 50
  • Posts: 914
Re: Xenon Retrofit Bi-Xenon Wire through bulkhead
« Reply #1 on: April 26, 2014, 12:27:27 pm »
Theres a gromet by the accelerator pedal to feed the wires through. Crawl into the footwell and peek up and see where the bundles of wires are going and have a feel for the rubber membrane of the gromet and poke a wire hanger through and pull through the bixenon wires to tap into cecm above you.

Good luck ;)
Logged
Recently back on the forum! Good to be back
Current Rides
Mazda RX8 231bhp ( very different little rocket lol!)
----
SOLD
2011 Golf MK6 1.4 TFSI R20/GTI Hybrid - DSG converted *world first!*
2007 MK5 Golf 1.4 FSI
2007 Golf MK5 GTI DSG
2008 Audi A5 3.0TDI

Offline diazbtn

  • Taking part
  • ***
  • Thank You
  • -Given: 8
  • -Receive: 0
  • Posts: 35
Re: Xenon Retrofit Bi-Xenon Wire through bulkhead
« Reply #2 on: April 26, 2014, 12:43:44 pm »
hello mate,

thanks for the heads up, I'll have a look :)
Logged
Pages: [1]   Go Up
« previous next »