Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Flash can gateway firmware  (Read 1216 times)

Offline ILoveTuna

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 198
Flash can gateway firmware
« on: April 09, 2014, 02:50:25 pm »
Is it possible to flash the firmware on a can gateway to make it compatible with the RNS 510.

Ross tech seem to suggest this is possible?

Has anyone done it? If so what tools/software did you use?

Thanks.
Logged

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: Flash can gateway firmware
« Reply #1 on: April 09, 2014, 02:56:15 pm »
Dealer tool can flash them

It is not 100% safe and know of some that have fried

Tbh you would do better to replace it with a newer one.

Then you swop back when you sell the car, you then have a gateway to sell
Logged
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline ILoveTuna

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 198
Re: Flash can gateway firmware
« Reply #2 on: April 09, 2014, 03:03:13 pm »
Yeah I have a new one ready to roll but just thought a flash might be easier than a replacement and re-code!

But if it's no a good idea will leave it.

Thanks!!  :happy2:
Logged

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: Flash can gateway firmware
« Reply #3 on: April 09, 2014, 03:17:14 pm »
If you have a new one fit it
Logged
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Re: Flash can gateway firmware
« Reply #4 on: April 09, 2014, 03:36:01 pm »
As EDDIE said. The most cost effective approach with the least amount of hassle is to swap out the Gateway, especially if you have a newer one already. Coding the new Gateway isn't too difficult either  :smiley:
Logged
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!

Offline ILoveTuna

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 198
Re: Flash can gateway firmware
« Reply #5 on: April 09, 2014, 03:57:31 pm »
Yeah will do, just thought plugging laptop in and clicking flash would be easier!!

Naturally lazy!!!  :smiley:
Logged

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Re: Flash can gateway firmware
« Reply #6 on: April 09, 2014, 08:01:01 pm »
Like wise. I bought my Gateway pre-coded from Eddie last year, literally plug and play with no coding required.
Logged
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!
Pages: [1]   Go Up
« previous next »