Ttrs lpfp problems?

[Pikey Motorsports]

Anyone getting any problems with there's? I have been having probs with my car cutting out under full power in 5th and 6th and belive it maybe the cause of the pump

[vRSAlex]

Yes it can happen.  It can cause the controller to overheat then shut down, causing the cuts.  With a map more suited to your build, and getting rid of the sh*t RS4 injectors then you should be fine.

[bacillus]

I've not had an issue like yours but on two occasions so far (over a 4 month period) I've noted this fault code. I had no CEL and the car has always performed well.

012555 - Low Pressure Fuel regulation
               P310B - 008 - Fuel Pressure Outside Specification - Intermittent
             Freeze Frame:
                    Fault Status: 00101000
                    Fault Priority: 0
                    Fault Frequency: 1
                    Reset counter: 255
                    Mileage: 47878 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 08:56:04

             Freeze Frame:
                    RPM: 765 /min
                    Load: 18.0 %
                    Speed: 0.0 km/h
                    Temperature: 91.0°C
                    Temperature: 43.0°C
                    Absolute Pres.: 980.0 mbar
                    Voltage: 13.843 V

The second occasion happened even after I changed the low fuel pressure sensor.
Have you scanned for a fault code and done  a basic setting for the pump?

[Pikey Motorsports]

Been wondering what it is and something suddenly just popped up whats pointed me to the problem!

Was something what needed sorting but didn't bother to much at only high speed so wasn't on the top of the to sort list...
See apr have removed it from there kit!

Will a ttrs controller fix it also?

[Pikey Motorsports]

I've not had an issue like yours but on two occasions so far (over a 4 month period) I've noted this fault code. I had no CEL and the car has always performed well.

012555 - Low Pressure Fuel regulation
               P310B - 008 - Fuel Pressure Outside Specification - Intermittent
             Freeze Frame:
                    Fault Status: 00101000
                    Fault Priority: 0
                    Fault Frequency: 1
                    Reset counter: 255
                    Mileage: 47878 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 08:56:04

             Freeze Frame:
                    RPM: 765 /min
                    Load: 18.0 %
                    Speed: 0.0 km/h
                    Temperature: 91.0°C
                    Temperature: 43.0°C
                    Absolute Pres.: 980.0 mbar
                    Voltage: 13.843 V

The second occasion happened even after I changed the low fuel pressure sensor.
Have you scanned for a fault code and done  a basic setting for the pump?

I belive that's normal... Only some are having probs with the car cutting out at high soeed

[vRSAlex]

I've not had an issue like yours but on two occasions so far (over a 4 month period) I've noted this fault code. I had no CEL and the car has always performed well.

012555 - Low Pressure Fuel regulation
               P310B - 008 - Fuel Pressure Outside Specification - Intermittent
             Freeze Frame:
                    Fault Status: 00101000
                    Fault Priority: 0
                    Fault Frequency: 1
                    Reset counter: 255
                    Mileage: 47878 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 08:56:04

             Freeze Frame:
                    RPM: 765 /min
                    Load: 18.0 %
                    Speed: 0.0 km/h
                    Temperature: 91.0°C
                    Temperature: 43.0°C
                    Absolute Pres.: 980.0 mbar
                    Voltage: 13.843 V

The second occasion happened even after I changed the low fuel pressure sensor.
Have you scanned for a fault code and done  a basic setting for the pump?

That code is normal.  Map spec is different to what the pump delivers.  Just need the specs broadening in the map.

[Tfsi_Mike]

Touch wood. I've had no dramas, yet. 

[bacillus]

Seem to recall that with the ttrs controller you lose the pump priming function when you open the drivers door.

[vRSAlex]

Been wondering what it is and something suddenly just popped up whats pointed me to the problem!

Was something what needed sorting but didn't bother to much at only high speed so wasn't on the top of the to sort list...
See apr have removed it from there kit!

Will a ttrs controller fix it also?

Ttrs controller causes more issues.

[Pikey Motorsports]

Hmm so what injectors do you recommend then? Revo only do rs4 I belive? Is there no controller what helps alex

[bacillus]

That code is normal.  Map spec is different to what the pump delivers.  Just need the specs broadening in the map.

Thanks for that Alex.
It may be coincidence but I also noticed on each occasion prior to scanning the car my polar readout showed 0 bar for both lpfp and fuel rail pressure.

[Pikey Motorsports]

Touch wood. I've had no dramas, yet. 

I had probs from day1 mate so you maybe ok..

[Tfsi_Mike]

You prob drive harder than me 

I've done a couple of trackdays though so should be ok

[Pikey Motorsports]

You prob drive harder than me  

I've done a couple of trackdays though so should be ok

It only does it when driven hard mate sometimes in 5th sometimes 6th doesnt always do it and wirks faultlessy other then that

[vRSAlex]

S3 injectors flow more and spray better than RS4 injectors.  Always have done.  Ditch the Revo map and go to Niki.  The big turbo maps were designed around ATP cast manifolds and GT series turbos.  Done about 5 years ago and things have moved on loads since then.  There is just no need for them to revisit them at the moment. I'm sure they will once they start doing their own bt kits.

Rs4 injectors were and are only used on US based maps as they were all that was available until the TTS was launched there.

I've just ordered some 155 bar return valves for the two Nortech kits I'm doing, and for my build. This should give enough fueling hopefully before needing anything else.  So many cool things that Niki will be working into these new maps.