Retro fitting headlamp washers for Xenon

[V2 FAN]

Hi All,

Just bagged myself some Xenon lights with auto levellers.

So to complete the setup I assume I need to order the following parts ?

Headlight washer loom - Part number not yet identified.
Pump for headlight washers £47.58 - 3B7 955 681 also N903 038 01 this is the O-ring for the pump
Gasket - 431 955 465A
Lift Cylinder - 1K6 955 978A x 2
Speed nuts - n909 591 01 x 4 - 2 per cylinder
Nozzle carrier Left - 1K6 955 103
"       "     "     Right - 1K6 955 104
Cover cap Left - 1K6 955 109 GRU
"          "   Right - 1K6 955 110 GRU

If cover caps are required I will order the primed ready for paint variants

Left = 1K0 807 717 B GRU
Right = 1K0 807 718 B GRU

Adaptor - 1T0 955 665
Connector - 1J0 955 665E x 3
Hose in 10m length - 1J0 955 964F
Angled piece - 1J0 955 665A
Junction - 7L6 955 873
Terminals - 1J0 955 846 x 8
Cable tie with terminal socket - 3D0 971 838E x 1
Washer bottle - 1K0 955 453 S 5.5ltr - £33.48
Water level switch  - 7M0 919 376
O ring - 7M0 919 382
Flat contact housing - 7M0 973 202

I will update costs as I go along 

Thanks All  

[marko]

In the process of getting this stuff together myself..
Think someone did a thread on this already with the prices attached
Could ideally do with having a good look at a car with everything fitted already so i can see what I'm short of

[V2 FAN]

In the process of getting this stuff together myself..
Think someone did a thread on this already with the prices attached
Could ideally do with having a good look at a car with everything fitted already so i can see what I'm short of

Hi

I'm still searching through old posts, most of the stuff posted above is copy & paste.
Bloody complicated long list lol for something that throws water at the headlights 

[skard]

I did it on my last mk5 just for the sake of it, probably cost a couple of hundred quid and that was a combo of old and new bits to complete it.

I'd suggest getting the 5.5L bottle from TPS/a dealer as it came pre drilled with the holes for all pumps and sensors you need.
As for pics, look for a guy called Maloosheck on VW Vortex as he had pictures of the routing on his.

I got the loom from Kufatec and this also gives you the low fluid warning.

[coolhandluke]

Have already got the washers  just need the Xenon's.....but where??

[V2 FAN]

Have already got the washers  just need the Xenon's.....but where??

How about these bad boys http://goo.gl/oL2AMw

Or you could by the Xenon look alike ones and then sell me your washer kit 

[V2 FAN]

I did it on my last mk5 just for the sake of it, probably cost a couple of hundred quid and that was a combo of old and new bits to complete it.

I'd suggest getting the 5.5L bottle from TPS/a dealer as it came pre drilled with the holes for all pumps and sensors you need.
As for pics, look for a guy called Maloosheck on VW Vortex as he had pictures of the routing on his.

I got the loom from Kufatec and this also gives you the low fluid warning.

Good pointers mate 

[coolhandluke]

Thanx for that Link,Nice one,i Take it they are the real thing?
 

[qauote author=V2 FAN link=topic=82384.msg851484#msg851484 date=1397837279]

Have already got the washers  just need the Xenon's.....but where??

How about these bad boys http://goo.gl/oL2AMw

Or you could by the Xenon look alike ones and then sell me your washer kit 
[/quote]

[V2 FAN]

Thanx for that Link,Nice one,i Take it they are the real thing

I think they are as they are listed as original Hella units, I'm sure someone will be along to correct me if I'm wrong 

[SI-R32]

Thanx for that Link,Nice one,i Take it they are the real thing

I think they are as they are listed as original Hella units, I'm sure someone will be along to correct me if I'm wrong 

no where close to OEM units the indicator/side light housing does not go the full width of the light, but mk5's getting old now so more people will start putting cheaper non OEM stuff on there cars

[coolhandluke]

Thanx,shall give these ones a miss and keep my out for some OEM ones.

Thanx for that Link,Nice one,i Take it they are the real thing

I think they are as they are listed as original Hella units, I'm sure someone will be along to correct me if I'm wrong 

no where close to OEM units the indicator/side light housing does not go the full width of the light, but mk5's getting old now so more people will start putting cheaper non OEM stuff on there cars

[mk_boy85]

I'll sell you my whole washer kit if you want as I want to shed some weight off my bumper. It has the 2 pumps, pipe work etc.


Sent from my iPhone using Tapatalk

[V2 FAN]

I'll sell you my whole washer kit if you want as I want to shed some weight off my bumper. It has the 2 pumps, pipe work etc.


Sent from my iPhone using Tapatalk

Certainly interested 
PM me a price buddy 

[mk_boy85]

I'm not sure what it's worth so pm me an offer. I'll include 2 washer pumps with jets, bumper mouldings, pipe work to the washer bottle.


Sent from my iPhone using Tapatalk

[V2 FAN]

I'm not sure what it's worth so pm me an offer. I'll include 2 washer pumps with jets, bumper mouldings, pipe work to the washer bottle.


Sent from my iPhone using Tapatalk

PM sent