Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
December 23, 2024, 07:30:15 am
News:
Home
Forum
Mods
Modifications Catalogue
Detailing Catalogue
Login
Register
Search
MK5 Golf GTI
»
Forum
»
All Things Mk5
»
Modifications & Technical Area
»
Technical Workshop
»
HPFP Torque setting
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: HPFP Torque setting (Read 10200 times)
Tfsi_Mike
Just look at my post count
Thank You
-Given: 241
-Receive: 309
Posts: 10222
Go Large or Go Home
My Ride:
HPFP Torque setting
«
on:
April 28, 2014, 08:14:12 pm »
As per the title has any one got the torque setting for the three 2.0 TFSI HPFP bolts?
Thanks in advance people.
Mike
Logged
bacillus
Just look at my post count
Thank You
-Given: 4
-Receive: 451
Posts: 6330
Re: HPFP Torque setting
«
Reply #1 on:
April 29, 2014, 08:18:20 am »
According to APR it should be tighten to 15Nm.
http://www.goapr.com/support/fsi_fuelpump_installation.pdf
Logged
Without traction power is nothing!
anorganix
Guest
HPFP Torque setting
«
Reply #2 on:
April 29, 2014, 09:05:09 am »
Torque the three bolts holding the pump to the head to 10Nm. Tighten the union nut on the fuel line to 25Nm.
If equipped, tighten the banjo bolt to 17Nm.
«
Last Edit: April 29, 2014, 09:07:49 am by anorganix
»
Logged
bacillus
Just look at my post count
Thank You
-Given: 4
-Receive: 451
Posts: 6330
Re: HPFP Torque setting
«
Reply #3 on:
April 29, 2014, 09:12:52 am »
You're right ^^, it is 10Nm!
I inadvertently quoted the low fuel pressure sensor torque from that pdf.
Logged
Without traction power is nothing!
Tfsi_Mike
Just look at my post count
Thank You
-Given: 241
-Receive: 309
Posts: 10222
Go Large or Go Home
My Ride:
Re: HPFP Torque setting
«
Reply #4 on:
April 29, 2014, 09:16:35 am »
Very helpful, cheers!
Should be added to changing cam follower guide
What is thought to be the better fuel line to have; the rubber left hand line or the steel one?
Logged
bacillus
Just look at my post count
Thank You
-Given: 4
-Receive: 451
Posts: 6330
Re: HPFP Torque setting
«
Reply #5 on:
April 29, 2014, 09:48:00 am »
The rubber line is the later revision and is better as it allows easier changing of the cam follower.
Logged
Without traction power is nothing!
Tfsi_Mike
Just look at my post count
Thank You
-Given: 241
-Receive: 309
Posts: 10222
Go Large or Go Home
My Ride:
Re: HPFP Torque setting
«
Reply #6 on:
April 29, 2014, 09:53:34 am »
I have the rubber one. Going to replace the spring clip as it's a bit rusty
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
MK5 Golf GTI
»
Forum
»
All Things Mk5
»
Modifications & Technical Area
»
Technical Workshop
»
HPFP Torque setting