Make a donation

Author Topic: Bens Black GTI - Now for sale  (Read 51614 times)

Offline bbfb10

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 28
  • Posts: 535
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,83664.0.html
Re: Bens Black GTI - Back from the Garage
« Reply #105 on: August 09, 2015, 08:31:24 pm »
Brackets were fine, just some numpty didnt tighten a bolt up properly. Really lucky it wasnt worse, could have been really nasty.


Full VCDS Hex + Can.

Offline bbfb10

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 28
  • Posts: 535
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,83664.0.html
Re: Bens Black GTI - Back from the Garage
« Reply #106 on: September 06, 2015, 09:23:04 am »
Managed to get a few little jobs done over the past few weeks. 

Tried in vain to get my hands to fit in the hole for changing the sidelight bulbs, sadly, as my hands are massive I had to give up and I didn't fancy taking the bumper off so I went cap in hand to the local Stealers. Paid £1.76 for two new bulbs from them and then got the tiny handed mechanic to put in my LED bulbs instead.

Also fitted the drivers side folding wing mirror and control module, I'm still not convinced that my door card is back on properly, but everything seems to be working ok, so that will do for me. Rain stopped play before I could fit the passengers side mirror, but hopefully Monday will be clear.  Whilst the door card was off I fitted a chrome tipped fuel release flap button to complete the set.

This week I'm hoping to get over to see @Matto to get my "Check Brake Pads" warning coded out and a few tweaks with his VCDS. Fingers crossed that soon I will have my boot pop enabled, footwell lights turned on and, if my CECM is compatible, cornering fogs too.

As always any comments or suggestions welcome.

Thanks for looking.


Full VCDS Hex + Can.

Offline Matto

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 24
  • -Receive: 116
  • Posts: 1894
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,37071.0.html
Re: Bens Black GTI - A Few Small Jobs Done
« Reply #107 on: September 07, 2015, 03:54:15 pm »
Glad you're finally sorted. Just drop me a pm or whatsapp when you're ready and we'll sort out  :happy2:

Offline bbfb10

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 28
  • Posts: 535
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,83664.0.html
Re: Bens Black GTI - A Few Small Jobs Done
« Reply #108 on: September 07, 2015, 08:16:52 pm »
Both folding mirrors now fitted, as Im sure you all know, they dont fold in that much, but I like having them.



I used these guides to help with the install, first one I did (drivers side) took a lot longer than the passengers side, but once I knew where all the screws went the second side went on a lot quicker.

http://www.r32oc.com/topic/40320-information-on-fitting-folding-mirrors/

http://www.my-gti.com/2158/volkswagen-golf-jetta-door-controller-information-mark-v


Next mod is the Mk6 climate control panel, does anyone know the name of the tool l need to remove/swap the wires around on the connector block?
« Last Edit: September 07, 2015, 08:22:24 pm by bbfb10 »


Full VCDS Hex + Can.

Offline bbfb10

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 28
  • Posts: 535
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,83664.0.html
Re: Bens Black GTI - Folding Mirrors Fitted.
« Reply #109 on: September 08, 2015, 08:35:29 pm »
Went to see @Matto today. Got my Boot Pop mod coded in, along with anti-hijack and one touch closing. Will put vids up in the next few days hopefully of the boot pop and the folding mirrors. I know we have all seen them before, but not on my car.


Full VCDS Hex + Can.

Offline bbfb10

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 28
  • Posts: 535
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,83664.0.html
Re: Bens Black GTI - Drivers side underseat drawer installed.
« Reply #110 on: September 11, 2015, 01:00:40 pm »
Fitted my underseat drawer this morning. Easy job following the instructions from here : http://forums.vwvortex.com/showthread.php?5009175-Installed-OEM-under-seat-drawers
As a Brucey Bonus I found over £5 in loose change under the seat!  :happy2:
Looking for a passengers side drawer now to complete the set.
« Last Edit: September 11, 2015, 01:03:59 pm by bbfb10 »


Full VCDS Hex + Can.

Offline bbfb10

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 28
  • Posts: 535
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,83664.0.html
Re: Bens Black GTI - Drivers side underseat drawer installed.
« Reply #111 on: September 17, 2015, 06:25:13 pm »
Couple of pics to go with the updates:

Underseat Drawer:



Chrome Fuel Switch:



Boot Pop:



Full VCDS Hex + Can.

Offline Imwithstupid

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 2
  • Posts: 35
    • Email
Re: Bens Black GTI - Drivers side underseat drawer installed.
« Reply #112 on: September 24, 2015, 01:01:02 pm »
where about are you located in Staffordshire mate? some nice upgrades done  :pomppomp:

Offline bbfb10

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 28
  • Posts: 535
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,83664.0.html
Re: Bens Black GTI - Drivers side underseat drawer installed.
« Reply #113 on: September 24, 2015, 01:43:53 pm »
Thanks @Imwithstupid Im near Burton on Trent, theres a few of us around Staffs. Where are you?


Full VCDS Hex + Can.

Offline Imwithstupid

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 2
  • Posts: 35
    • Email
Re: Bens Black GTI - Drivers side underseat drawer installed.
« Reply #114 on: September 24, 2015, 02:07:18 pm »
Stoke-On-Trent I'm from  :smiley:

Offline bbfb10

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 28
  • Posts: 535
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,83664.0.html
Re: Bens Black GTI - Drivers side underseat drawer installed.
« Reply #115 on: September 24, 2015, 02:13:33 pm »
Not too far then. Get a build thread up. Im always up for a chat, lm not the most knowledgable, but happy to help when/if l can.


Full VCDS Hex + Can.

Offline bbfb10

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 28
  • Posts: 535
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,83664.0.html
Re: Bens Black GTI - Drivers side underseat drawer installed.
« Reply #116 on: October 20, 2015, 11:12:46 am »
Went on eBay and bought some interior door grab handles to replace my tatty knackered old ones. Will be fitting them today so will upload some pics. After that Im going to attempt to update the firmware on my DNX521 DAB.

Also managed to source an underseat drawer for the passenger seat for £25.

Its the little touches.
« Last Edit: October 20, 2015, 11:17:40 am by bbfb10 »


Full VCDS Hex + Can.

Offline bbfb10

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 28
  • Posts: 535
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,83664.0.html
Re: Bens Black GTI - Drivers side underseat drawer installed.
« Reply #117 on: October 20, 2015, 07:04:06 pm »
Tidying up the interior between jobs today so only got 1 door handle changed.

Manky tatty old door grab handle.



New smooth door handle.



Looks much better, passenger side next.


Full VCDS Hex + Can.

Offline bbfb10

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 28
  • Posts: 535
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,83664.0.html
Re: Bens Black GTI - Tidying up the interior.
« Reply #118 on: November 04, 2015, 10:14:05 am »
Whilst washing the car the other day I felt a bit of bubbling on the rear wheel arches, after a bit of online research I've found that this is not a "common" problem, but has happened a fair few times.  I took the car to my local dealer (TL Darby in Burton on Trent) for their body shop to inspect and the guy there did agree that it was "odd" for it to be happening on both sides, but then informed me that their body shop didn't deal with warranty claims. Brilliant!

I will be taking my car to VW Parkway in Derby asap for them to take a look at it and will report back with what happens. My wing warranty claim was dealt with by Parkway so I'm hoping for a similar result.


Full VCDS Hex + Can.

Offline bbfb10

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 28
  • Posts: 535
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,83664.0.html
Re: Bens Black GTI - More rust!
« Reply #119 on: November 11, 2015, 04:16:38 pm »
Little update; have fitted the passengers side underseat drawer.



Full VCDS Hex + Can.