Author Topic: EIG - Mk5 Tornado Red Edition 30 (Read 25549 times)

Haz911 · « **Reply #45 on:** September 15, 2014, 12:32:36 pm »

Took a trip to Forge Action Day @ Castle Combe on Saturday and managed to get a few parts at some really good prices but they didn't have them with them on the day so should receive them sometime this week :)

Pics to follow!

Haz911 · « **Reply #46 on:** September 19, 2014, 04:23:13 pm »

So the part I ordered at Forge Action Day got delivered and had a go at fitting them last night :)

Inside of the old PCV then the new Revo PCV Revamp Kit:

Revo High Flow Intake System:

More to come ;)

DamoP · « **Reply #47 on:** September 20, 2014, 10:56:55 am »

where did you get your grill badge dude?

Haz911 · « **Reply #48 on:** September 20, 2014, 11:05:34 am »

Quote from: demon666 on September 20, 2014, 10:56:55 am

where did you get your grill badge dude?

Got it from a guy off here, it's a Seibon carbon badge :)

DamoP · « **Reply #49 on:** September 20, 2014, 11:16:53 am »

Quote from: Haz911 on September 20, 2014, 11:05:34 am

Quote from: demon666 on September 20, 2014, 10:56:55 am
where did you get your grill badge dude?
Got it from a guy off here, it's a Seibon carbon badge :)

thanks mate, it suits the car. ill have a look at one for mine

Haz911 · « **Reply #50 on:** October 20, 2014, 07:25:48 pm »

Couple of Phone Pics :)

th3_f15t · « **Reply #51 on:** October 20, 2014, 07:33:28 pm »

Just read your posts, saw that you were getting brake fade. I would swap the pads for some other ones, the EBC ones aren't very well rated on this forum. I just plain OEM replacement parts and they haven't faded yet, even on a spirited drive but I've not taken it to a track day yet.

Haz911 · « **Reply #52 on:** October 20, 2014, 07:54:59 pm »

Quote from: th3_f15t on October 20, 2014, 07:33:28 pm

Just read your posts, saw that you were getting brake fade. I would swap the pads for some other ones, the EBC ones aren't very well rated on this forum. I just plain OEM replacement parts and they haven't faded yet, even on a spirited drive but I've not taken it to a track day yet.

Awesome, thanks for the info! The pads on there have a load of life but I might swap them anyway, the discs were used when I bought them and I think they have been cooked at some point as feel slightly warped.
Especially as it has the blue race fluid I didn't think I would get may fade tbh - will report back :)

Haz911 · « **Reply #53 on:** November 18, 2014, 06:24:21 pm »

So after thinking about some more power and potential for some track days, I decided that the R32 brakes just aren't cutting it for me....

SO I managed to grab a bargain on Ebay:

Tarox B360 10 Pot Calipers with 360mm 2 Piece discs......I have taken them to a local engineering shop who have said that 1 of the seals could do with replacing so I have ordered 20 brand new pistons/seals to refurb the calipers completely, the discss are being skimmed as look like they have taken some abuse from some real hard compound pads (Although no lips on them!)...

Also found out from Tarox that they were used on one of Milteks Race cars

Ohh and removed the rear seats for the time being as I need to give them a serious clean :)

DamoP · « **Reply #54 on:** November 18, 2014, 06:28:07 pm »

Saintsteve · « **Reply #55 on:** November 18, 2014, 06:51:24 pm »

Quote from: Haz911 on November 18, 2014, 06:24:21 pm

So after thinking about some more power and potential for some track days, I decided that the R32 brakes just aren't cutting it for me....

SO I managed to grab a bargain on Ebay:

Tarox B360 10 Pot Calipers with 360mm 2 Piece discs......I have taken them to a local engineering shop who have said that 1 of the seals could do with replacing so I have ordered 20 brand new pistons/seals to refurb the calipers completely, the discss are being skimmed as look like they have taken some abuse from some real hard compound pads (Although no lips on them!)...

Also found out from Tarox that they were used on one of Milteks Race cars

Ohh and removed the rear seats for the time being as I need to give them a serious clean :)

How much was your bargain then??

Haz911 · « **Reply #56 on:** December 18, 2014, 06:03:45 pm »

Quote from: Saintsteve on November 18, 2014, 06:51:24 pm

Quote from: Haz911 on November 18, 2014, 06:24:21 pm
So after thinking about some more power and potential for some track days, I decided that the R32 brakes just aren't cutting it for me....

SO I managed to grab a bargain on Ebay:

Tarox B360 10 Pot Calipers with 360mm 2 Piece discs......I have taken them to a local engineering shop who have said that 1 of the seals could do with replacing so I have ordered 20 brand new pistons/seals to refurb the calipers completely, the discss are being skimmed as look like they have taken some abuse from some real hard compound pads (Although no lips on them!)...

Also found out from Tarox that they were used on one of Milteks Race cars

How much was your bargain then??

Just shy of the £700 mark which I thought was a bargain considering they are over 3K brand new

Haz911 · « **Reply #57 on:** December 18, 2014, 06:17:47 pm »

So a few more updates, had a bit of a scare today when the guy started to skim the discs. He was very wary of the minimum thickness of 24mm and the discs were slightly warped but luckily they stayed within the limit at 24.7 and 24.8 mm and now basically brand new and straight again :)

After having a few conversations with Tarox it turns out these brakes were on a German Mk6 R milltek Track car and done a 24 hour session in Dubai and a few other races so I can now see why the seals where completely destroyed and discs warped.

Anyway, 20 brand new pistons and seals (10 per caliper) as well as brand new bolt kit, pad retaining clips and new fast road/track pads: