Make a donation

Author Topic: Attaching pressed plates.  (Read 1070 times)

Offline gazrn

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 2
  • Posts: 128
    • Email
Attaching pressed plates.
« on: May 15, 2014, 09:47:37 am »
Alright guys,

i have just bought some pressed plates and number plate surrounds. I aint worried about fixing to the rear but my question is regarding the front. Looking at the number plate it sits on a fixing already, if i use a numberplate surround aswell will it make the number plate sit too proud and look stupid or should i just fix the plate to the car without the surround on the front ?

Offline Marc-5-GTI

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 13
  • -Receive: 26
  • Posts: 549
    • Email
Re: Attaching pressed plates.
« Reply #1 on: May 15, 2014, 09:55:02 am »
I used 3M double sided foam tape, I only put a surround on the back cause the surround wouldn't 'bend' around the bumper on the front how I wanted it and I didn't like how it sat/stuck out.
3dr Reflex Silver GTI | BBS VZ | Eibach Sportlines | Cumbria


Offline xjay1337

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 15
  • -Receive: 377
  • Posts: 4916
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,88399.0.html
Re: Attaching pressed plates.
« Reply #2 on: May 15, 2014, 10:02:22 am »
Number plate tape from Halfords (green) which is cheap and sticks well or use plate holders which screw in and then the plate clips into the holder.