Make a donation

Author Topic: Mk5 undertray soundproofing  (Read 2360 times)

Offline S4nup

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 5
  • Posts: 148
    • Email
Mk5 undertray soundproofing
« on: June 02, 2014, 10:36:55 pm »
Hi all
Wondering if anyone can shed some light on this. Noticed the other day that the undertray to my pre-facelift gt tdi was sagging (must have caught it on a speed bump or something) so I decided to replace it as on closer inspection it was pretty smashed up. I ordered the blue motion replacement and removed my old one. They are very similar in look with the noticeable difference being the blue motion has 3 air ducts and the one I removed has 2.
Now the big difference is the old one had a soundproofing type material (heavily padded in a plastic wrap of some kind) attached to the engine side of the tray. The blue motion one does not, it's just a flimsy piece of plastic. Any ideas if this is available seperately? I would swap them over but the existing one is caked in oil and crud from what I suspect to be a oil leak of some sort in the past.

Thanks

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Re: Mk5 undertray soundproofing
« Reply #1 on: June 03, 2014, 12:06:24 pm »
Dont think it is a available seperatly but have a free bump.  :smiley:
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!

Offline h45gti

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 3
  • Posts: 91
Re: Mk5 undertray soundproofing
« Reply #2 on: June 11, 2014, 10:50:01 pm »
http://www.mk5golfgti.co.uk/forum/index.php/topic,63726.0.html

not sure if this link will help but google part number see if comes with the padding your talking about


VW Golf GTI 57reg

Offline S4nup

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 5
  • Posts: 148
    • Email
Re: Mk5 undertray soundproofing
« Reply #3 on: June 12, 2014, 06:51:34 pm »
Thanks mate. That's the pat number for the bit I already have. Thanks though!