Make a donation

Author Topic: Getting the best out of standard brake set up?  (Read 5455 times)

Offline bushypad

  • Always Involved
  • ****
  • Thank You
  • -Given: 18
  • -Receive: 2
  • Posts: 353
Getting the best out of standard brake set up?
« on: June 09, 2014, 07:30:46 pm »
After weighing up my options i'm wanting to keep the standard set up but what are my best options for the best set up?

I have read ferodo ds2500 are great for pads with the brembo discs. Also this is a noob question but can you have different pads on the fronts and the rears. Apologies for any silly questions  :laugh:

Is there any need for new calipers? I have the standard ones on now and been used for 83k miles

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6329
Re: Getting the best out of standard brake set up?
« Reply #1 on: June 09, 2014, 07:33:38 pm »
Also this is a noob question but can you have different pads on the fronts and the rears.

Absolutely yes but the higher brake torque pad must be at the front.
Without traction power is nothing!

Offline bushypad

  • Always Involved
  • ****
  • Thank You
  • -Given: 18
  • -Receive: 2
  • Posts: 353
Re: Getting the best out of standard brake set up?
« Reply #2 on: June 09, 2014, 07:36:45 pm »
Thanks appreciate that  :happy2:

Offline bushypad

  • Always Involved
  • ****
  • Thank You
  • -Given: 18
  • -Receive: 2
  • Posts: 353
Re: Getting the best out of standard brake set up?
« Reply #3 on: June 09, 2014, 07:52:28 pm »
So been pricing up. Buying the front 312mm and rear 286mm brembo discs along with brembo pads for the rears. Total of £196

Ferodo ds2500 front pads from motorsport world for £134 (£7.50) for delivery.

Does this sound ok?

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6329
Re: Getting the best out of standard brake set up?
« Reply #4 on: June 09, 2014, 07:55:46 pm »
If keeping the standard front calipers then you may get better brake pedal feel and more even pad wear with a caliper stiffening kit.
http://www.tyrolsport.com/brakes/tyrolsport-brake-caliper-stiffening-kit-for-vw/audi/
Without traction power is nothing!

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=j285tenbd10d0knrutksr4sp7p&/topic,19740.0.html
Re: Getting the best out of standard brake set up?
« Reply #5 on: June 09, 2014, 07:56:27 pm »
Look at mintex m1144 or m1155... Both better than the ds2500

Offline grey golfster

  • Always Involved
  • ****
  • Thank You
  • -Given: 79
  • -Receive: 34
  • Posts: 460
  • Edition 30 # 993; Stage 2 n a bit....
Re: Getting the best out of standard brake set up?
« Reply #6 on: June 09, 2014, 08:06:23 pm »
Changed all my standard hoses foe Goodrich Aeroquip. Full fluid flush.
Cost for parts approx £120 when on offer at carparts4less with disc codes.

Really noticable improvemnet in pedal feel, on a setup that is standard other than red stuff pads.

Good value mod i reckon.

dansmith180

  • Guest
Re: Getting the best out of standard brake set up?
« Reply #7 on: June 09, 2014, 08:45:38 pm »
So been pricing up. Buying the front 312mm and rear 286mm brembo discs along with brembo pads for the rears. Total of £196

Ferodo ds2500 front pads from motorsport world for £134 (£7.50) for delivery.


By the time you've spent that and got Braided hoses and dot 5.1 fluid (which you would need to get the best out of them) would you not consider upgrading to an R32/S3 set up?

Offline Pikey Motorsports

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 34
  • Posts: 1793
Re: Getting the best out of standard brake set up?
« Reply #8 on: June 09, 2014, 09:03:00 pm »
So been pricing up. Buying the front 312mm and rear 286mm brembo discs along with brembo pads for the rears. Total of £196

Ferodo ds2500 front pads from motorsport world for £134 (£7.50) for delivery.


By the time you've spent that and got Braided hoses and dot 5.1 fluid (which you would need to get the best out of them) would you not consider upgrading to an R32/S3 set up?


That was my thoughts a front s3 setup with even stock pads and discs would outperform the gti setup with all the fancy bits
TSR PERFORMANCE GTX30 520BHP
LITCHFIELD R35 GT-R 660BHP
MSL E63 AMG 720BHP
HCP BM3 M5 800BHP

Offline bushypad

  • Always Involved
  • ****
  • Thank You
  • -Given: 18
  • -Receive: 2
  • Posts: 353
Re: Getting the best out of standard brake set up?
« Reply #9 on: June 10, 2014, 12:51:01 pm »
I considered this but i'm finding it difficult to locate a good r32/s3 set up?

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=j285tenbd10d0knrutksr4sp7p&/topic,19740.0.html
Re: Getting the best out of standard brake set up?
« Reply #10 on: June 10, 2014, 12:51:58 pm »
I considered this but i'm finding it difficult to locate a good r32/s3 set up?

i will have some calipers for sale soon.. just need to get them painted

Offline bushypad

  • Always Involved
  • ****
  • Thank You
  • -Given: 18
  • -Receive: 2
  • Posts: 353
Re: Getting the best out of standard brake set up?
« Reply #11 on: June 10, 2014, 01:00:52 pm »
So been pricing up. Buying the front 312mm and rear 286mm brembo discs along with brembo pads for the rears. Total of £196

Ferodo ds2500 front pads from motorsport world for £134 (£7.50) for delivery.


By the time you've spent that and got Braided hoses and dot 5.1 fluid (which you would need to get the best out of them) would you not consider upgrading to an R32/S3 set up?




That was my thoughts a front s3 setup with even stock pads and discs would outperform the gti setup with all the fancy bits

So you are saying i only need the front s3/r32 set up and can just have the stock discs on the rear?

Offline bushypad

  • Always Involved
  • ****
  • Thank You
  • -Given: 18
  • -Receive: 2
  • Posts: 353
Re: Getting the best out of standard brake set up?
« Reply #12 on: June 10, 2014, 01:20:18 pm »
I considered this but i'm finding it difficult to locate a good r32/s3 set up?

i will have some calipers for sale soon.. just need to get them painted

Could the r32 calipers be put on to a stock set up? Could you pm me a price mate

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=j285tenbd10d0knrutksr4sp7p&/topic,19740.0.html
Re: Getting the best out of standard brake set up?
« Reply #13 on: June 10, 2014, 01:26:39 pm »
No... you need bigger discs pads.

Offline bushypad

  • Always Involved
  • ****
  • Thank You
  • -Given: 18
  • -Receive: 2
  • Posts: 353
Re: Getting the best out of standard brake set up?
« Reply #14 on: June 10, 2014, 02:01:28 pm »
I see.. I was trying to find out what the standard size for rear discs some people saying. 282/286 and some 256mm. Anyone know?