Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Milltek and Neuspeed ARB problem.  (Read 990 times)

Offline dkcampbell

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 47
    • Email
Milltek and Neuspeed ARB problem.
« on: June 18, 2014, 05:42:18 pm »
hi guys...

i have a non res milltek on my ED30.... was a perfect fit, nice and snug into the bumper recess...

fitted my neuspeed ARB, and that was a tight squeeze, since fitting and running for a day or so, the back box has dropped, and the exhaust is actually sitting on the ARB...


has anyone else had this problem...?

thanks
Logged

Offline Pikey Motorsports

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 34
  • Posts: 1793
Re: Milltek and Neuspeed ARB problem.
« Reply #1 on: June 18, 2014, 10:18:27 pm »
Never heard it before.. Is your exhaust sitting correctly? And rubber mounts okay holding the box up?
Logged
TSR PERFORMANCE GTX30 520BHP
LITCHFIELD R35 GT-R 660BHP
MSL E63 AMG 720BHP
HCP BM3 M5 800BHP

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: Milltek and Neuspeed ARB problem.
« Reply #2 on: June 19, 2014, 02:46:30 pm »
The roll bar sits over the exhaust, so there is no way it can hit it.

Upload some pics.
Logged
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook

Offline 56OctyVRS

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 39
  • -Receive: 72
  • Posts: 1003
Re: Milltek and Neuspeed ARB problem.
« Reply #3 on: June 27, 2014, 05:32:58 am »
If you are getting a knocking noise from the rear; my guess is the drop links are loose or need replacing.
Logged
Frozen White Ford Focus 1.6 Ecoboost Titanium.
Mods so far - Superchips Bluefin, High Flow Air Box
Pages: [1]   Go Up
« previous next »