Make a donation

Author Topic: Forge Twintake  (Read 5412 times)

Saintsteve

  • Guest
Re: Forge Twintake
« Reply #15 on: July 04, 2014, 01:50:32 pm »
My fuel trims run at 8% with my twintake .Stage2 RTech.

Issue you have the Filter cones pointing the correct direction though..that doesn't help.

Offline betty_swollox

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 0
  • -Receive: 29
  • Posts: 650
Re: Forge Twintake
« Reply #16 on: July 04, 2014, 01:52:31 pm »
My fuel trims run at 8% with my twintake .Stage2 RTech.

Issue you have the Filter cones pointing the correct direction though..that doesn't help.

Oooohhhh R TECH  :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :star: :star: :star: :star: :star: :star: :star: :star: :star: :star: :star:
2010 Leon CUPRA
BCS Powervalve Exhaust
Revo Ceramic Intake
APR Stage 2

Saintsteve

  • Guest
Re: Forge Twintake
« Reply #17 on: July 04, 2014, 01:55:56 pm »
My fuel trims run at 8% with my twintake .Stage2 RTech.

Issue you have the Filter cones pointing the correct direction though..that doesn't help.

Oooohhhh R TECH  :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :star: :star: :star: :star: :star: :star: :star: :star: :star: :star: :star:

My cracked Milltek leaking flexi joint on the downpipe caused my high fuel trim values, not the intake  :angry015:
« Last Edit: July 04, 2014, 02:29:12 pm by Saintsteve »

Offline betty_swollox

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 0
  • -Receive: 29
  • Posts: 650
Re: Forge Twintake
« Reply #18 on: July 04, 2014, 02:02:47 pm »
My fuel trims run at 8% with my twintake .Stage2 RTech.

Issue you have the Filter cones pointing the correct direction though..that doesn't help.

Oooohhhh R TECH  :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :star: :star: :star: :star: :star: :star: :star: :star: :star: :star: :star:

My cracked Milltek downpipe caused my high fuel trim values, not the intake  :angry015:


Well at least we both agree that milltek is sh*te  :notworthy: :notworthy: :notworthy: lol
2010 Leon CUPRA
BCS Powervalve Exhaust
Revo Ceramic Intake
APR Stage 2

Saintsteve

  • Guest
Re: Forge Twintake
« Reply #19 on: July 04, 2014, 02:05:07 pm »
My fuel trims run at 8% with my twintake .Stage2 RTech.

Issue you have the Filter cones pointing the correct direction though..that doesn't help.

Oooohhhh R TECH  :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :star: :star: :star: :star: :star: :star: :star: :star: :star: :star: :star:

My cracked Milltek downpipe caused my high fuel trim values, not the intake  :angry015:


Well at least we both agree that milltek is sh*te  :notworthy: :notworthy: :notworthy: lol

Well for buying it 2nd hand for small change in 2009, getting it replaced in 2014 for a brand new one free of charge speaks volumes... Wonder if BCS will offer this in years to come for the 2nd hand buyers out there...

Offline betty_swollox

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 0
  • -Receive: 29
  • Posts: 650
Re: Forge Twintake
« Reply #20 on: July 04, 2014, 02:08:18 pm »
My fuel trims run at 8% with my twintake .Stage2 RTech.

Issue you have the Filter cones pointing the correct direction though..that doesn't help.

Oooohhhh R TECH  :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :star: :star: :star: :star: :star: :star: :star: :star: :star: :star: :star:

My cracked Milltek downpipe caused my high fuel trim values, not the intake  :angry015:


Well at least we both agree that milltek is sh*te  :notworthy: :notworthy: :notworthy: lol

Well for buying it 2nd hand for small change in 2009, getting it replaced in 2014 for a brand new one free of charge speaks volumes... Wonder if BCS will offer this in years to come for the 2nd hand buyers out there...


It won't crack so it won't be a problem

 :party: :party: :party: :party:
2010 Leon CUPRA
BCS Powervalve Exhaust
Revo Ceramic Intake
APR Stage 2

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=42vi2a6n8bsjdpp4itdoage5u4&/topic,19740.0.html
Re: Forge Twintake
« Reply #21 on: July 04, 2014, 02:12:40 pm »
^^^ True story.

Made correctly, it shouldnt crack at all.


I would say that your experience steve is not common. If that was A. N. Other  then the outcome might have been different.

Offline betty_swollox

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 0
  • -Receive: 29
  • Posts: 650
Re: Forge Twintake
« Reply #22 on: July 04, 2014, 02:13:34 pm »
^^^ True story.

Made correctly, it shouldnt crack at all.
:happy2: :happy2: :happy2:
« Last Edit: July 04, 2014, 02:13:47 pm by richwig83 »
2010 Leon CUPRA
BCS Powervalve Exhaust
Revo Ceramic Intake
APR Stage 2

Saintsteve

  • Guest
Re: Forge Twintake
« Reply #23 on: July 04, 2014, 02:14:42 pm »
My fuel trims run at 8% with my twintake .Stage2 RTech.

Issue you have the Filter cones pointing the correct direction though..that doesn't help.

Oooohhhh R TECH  :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :star: :star: :star: :star: :star: :star: :star: :star: :star: :star: :star:

My cracked Milltek downpipe caused my high fuel trim values, not the intake  :angry015:


Well at least we both agree that milltek is sh*te  :notworthy: :notworthy: :notworthy: lol

Well for buying it 2nd hand for small change in 2009, getting it replaced in 2014 for a brand new one free of charge speaks volumes... Wonder if BCS will offer this in years to come for the 2nd hand buyers out there...


It won't crack so it won't be a problem

 :party: :party: :party: :party:

You hope...it's not the metal that cracks due to rubbish material...it's the flex in the system that determines whether your BCS will last over time  :P

Oh and Richard, if I wasn't a member of a public speaking forum, then yes, it might of been different..but good news and customer after sales should always be made public.

I will also point out, I never asked for a replacement. Hats off to Milltek.
« Last Edit: July 04, 2014, 02:18:36 pm by Saintsteve »

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=42vi2a6n8bsjdpp4itdoage5u4&/topic,19740.0.html
Re: Forge Twintake
« Reply #24 on: July 04, 2014, 02:17:50 pm »
Flexi on the BCS is twice as long as on the competition.



Slightly longer than OEM.


Anyway... slightly O/T  :signLOL:

Offline betty_swollox

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 0
  • -Receive: 29
  • Posts: 650
Re: Forge Twintake
« Reply #25 on: July 04, 2014, 02:20:28 pm »
My fuel trims run at 8% with my twintake .Stage2 RTech.

Issue you have the Filter cones pointing the correct direction though..that doesn't help.

Oooohhhh R TECH  :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :love: :star: :star: :star: :star: :star: :star: :star: :star: :star: :star: :star:

My cracked Milltek downpipe caused my high fuel trim values, not the intake  :angry015:


Well at least we both agree that milltek is sh*te  :notworthy: :notworthy: :notworthy: lol

Well for buying it 2nd hand for small change in 2009, getting it replaced in 2014 for a brand new one free of charge speaks volumes... Wonder if BCS will offer this in years to come for the 2nd hand buyers out there...


It won't crack so it won't be a problem

 :party: :party: :party: :party:

You hope...it's not the metal that cracks due to rubbish material...it's the flex in the system that determines whether your BCS will last over time  :P

Oh and Richard, if I wasn't a member of a public speaking forum, then yes, it might of been different..but good news and customer after sales should always be made public.

I will also point out, I never asked for a replacement. Hats off to Milltek.


I have no doubts about whether it'll crack or not

and it just goes to show that miltek know their downpipes are sh*te, as its so easy to get a replacement  :wink:
2010 Leon CUPRA
BCS Powervalve Exhaust
Revo Ceramic Intake
APR Stage 2

Saintsteve

  • Guest
Re: Forge Twintake
« Reply #26 on: July 04, 2014, 02:22:18 pm »
Flexi on the BCS is twice as long as on the competition.



Slightly longer than OEM.


Anyway... slightly O/T  :signLOL:

I'm sure over time, it will be either good or bad, but as in time like most things, BCS is still very new, so we won't know for a few years yet.

Anyway , gone slightly off topic..

I'm blaming sweaty bollox's fault or whatever his name is.. :laugh:

Offline betty_swollox

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 0
  • -Receive: 29
  • Posts: 650
Re: Forge Twintake
« Reply #27 on: July 04, 2014, 02:24:24 pm »
Flexi on the BCS is twice as long as on the competition.



Slightly longer than OEM.


Anyway... slightly O/T  :signLOL:

I'm sure over time, it will be either good or bad, but as in time like most things, BCS is still very new, so we won't know for a few years yet.

Anyway , gone slightly off topic..

I'm blaming sweaty bollox's fault or whatever his name is.. :laugh:

Mr Swollox to you  :mad: :mad:


 :signLOL:
2010 Leon CUPRA
BCS Powervalve Exhaust
Revo Ceramic Intake
APR Stage 2

Offline SurreyED30

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 37
  • -Receive: 32
  • Posts: 1362
Re: Forge Twintake
« Reply #28 on: July 04, 2014, 02:37:10 pm »
ebay 3"downpipe FTW  :P
Edition 30 build No:692 Revo stage 2 SOLD
Edition 30 build No:440 Stage 1 SOLD

Offline betty_swollox

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 0
  • -Receive: 29
  • Posts: 650
Re: Forge Twintake
« Reply #29 on: July 04, 2014, 02:38:42 pm »
2010 Leon CUPRA
BCS Powervalve Exhaust
Revo Ceramic Intake
APR Stage 2