Make a donation
« previous next »
Pages: 1 [2]   Go Down

Author Topic: Catch Can Fitting for Octavia vRS  (Read 10371 times)

Offline Bogwoppit

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 7
  • Posts: 77
Re: Catch Can Fitting for Octavia vRS
« Reply #15 on: November 18, 2009, 02:55:28 pm »
To save starting a new thread I thought I would post this here, same car Octavia vRS TFSI.

Here are some pics of the BSH High capacity catch can I fitted at the weekend. It differs from your kit slightly mater as there are no 90 degree elbows for the BSH plate. Also there were no jubilee clips with mine so I have temporarily fitted some cheap zinc plated ones, will replace with stainless steel at a later date.
Also, spoke to my insurance last night and it makes no difference to my policy as it doesn't increase the performance.  :happy2:



If you have an aftermarket induction kit it may not be possible to fit your can here












« Last Edit: November 20, 2009, 11:50:15 am by Bogwoppit »
Logged

Offline CarrG

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 2
  • -Receive: 17
  • Posts: 589
Re: Catch Can Fitting for Octavia vRS
« Reply #16 on: November 18, 2009, 03:09:18 pm »
Looking good mate  :happy2:
Logged
K1 Revo 2+
Ibis RS3
VW California 180 DSG "Candy"!

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Catch Can Fitting for Octavia vRS
« Reply #17 on: November 18, 2009, 03:12:26 pm »
^^^^
Very helpful re the higher capacity can and although not a GTI, I can see how things could fit.

:drinking:
Logged


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline Hedge

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 484
  • -Receive: 304
  • Posts: 6621
Re: Catch Can Fitting for Octavia vRS
« Reply #18 on: November 18, 2009, 03:16:21 pm »
@ Mr Bogwoppit, where did you get those straight metal unions from?

Were they supplied with your kit?
Logged

Offline Bogwoppit

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 7
  • Posts: 77
Re: Catch Can Fitting for Octavia vRS
« Reply #19 on: November 18, 2009, 03:29:20 pm »
Quote from: Hedge on November 18, 2009, 03:16:21 pm
@ Mr Bogwoppit, where did you get those straight metal unions from?

Were they supplied with your kit?

Yes there were the ones that came with the kit.

Just checked the BSH website and the pictures also show the metal unions with the high capacity (or competition as it is now called) catch can. The smaller can comes with the plastic elbows, which TBH would have made routing the pipes under the engine cover a little easier.
« Last Edit: November 18, 2009, 03:32:08 pm by Bogwoppit »
Logged
Pages: 1 [2]   Go Up
« previous next »