Make a donation

Author Topic: AIRTEC & FORGE Twintercooler Owners HELP?!  (Read 4806 times)

Offline Wooosh

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 6
  • -Receive: 87
  • Posts: 1894
  • Factory ponies.
    • Email
AIRTEC & FORGE Twintercooler Owners HELP?!
« on: July 24, 2014, 01:29:39 pm »
I've currently got an AIRTEC twin spec intercooler same setup as FORGE twintercooler, but the boost pipe on the drivers side keeps coming lose since last Thursday & its beginning to drive me mad. Wondering if anyone else has experienced this problem? As I would like to know what clamps to buy or whatever is required to stop this from happening again. Thanks in advance! :drinking:
Stage 2 MK5 GTI Revo GONE
Stage 1+ MK5 GTI R-Tech GONE
Stage 2 MK5 GTI Edition 30 GoAPR

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=kribgjr4apk814d7j2jt504vub&/topic,19740.0.html
Re: AIRTEC & FORGE Twintercooler Owners HELP?!
« Reply #1 on: July 24, 2014, 01:33:59 pm »
What clamps are you using?

Offline Wooosh

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 6
  • -Receive: 87
  • Posts: 1894
  • Factory ponies.
    • Email
Re: AIRTEC & FORGE Twintercooler Owners HELP?!
« Reply #2 on: July 24, 2014, 01:43:19 pm »
The stainless jubilee clamps which came with the intercooler.
Stage 2 MK5 GTI Revo GONE
Stage 1+ MK5 GTI R-Tech GONE
Stage 2 MK5 GTI Edition 30 GoAPR

Offline toosmiles

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 22
  • -Receive: 18
  • Posts: 635
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,92286.0.html
Re: AIRTEC & FORGE Twintercooler Owners HELP?!
« Reply #3 on: July 24, 2014, 03:05:27 pm »
I've always upgraded to mikalor hi grip jubilee clips just in case m8
I'd try some of these first ;)
Golf R mk6 R-tech tuned GTX3071r

Offline scopes

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 131
  • -Receive: 115
  • Posts: 2283
  • Wolfsburg Edition
    • My GTI
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,49748.0.html
Re: AIRTEC & FORGE Twintercooler Owners HELP?!
« Reply #4 on: July 24, 2014, 03:10:05 pm »
Just check to make sure the boost pipes have enough room for when the engine rocks back and forth, when chaning gear...

 :happy2:
If it's not broke, Mod it.....



Silver is the way !

Offline Pikey Motorsports

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 34
  • Posts: 1793
Re: AIRTEC & FORGE Twintercooler Owners HELP?!
« Reply #5 on: July 25, 2014, 02:05:32 pm »
Has the hose been cut to short?
TSR PERFORMANCE GTX30 520BHP
LITCHFIELD R35 GT-R 660BHP
MSL E63 AMG 720BHP
HCP BM3 M5 800BHP

Offline Wooosh

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 6
  • -Receive: 87
  • Posts: 1894
  • Factory ponies.
    • Email
Re: AIRTEC & FORGE Twintercooler Owners HELP?!
« Reply #6 on: July 25, 2014, 11:33:31 pm »
I've always upgraded to mikalor hi grip jubilee clips just in case m8
I'd try some of these first ;)
You got a link for those clamps mate?

Just check to make sure the boost pipes have enough room for when the engine rocks back and forth, when chaning gear...

 :happy2:
There's plenty of room so nothing to do with movement.

Has the hose been cut to short?
Na not too short just seems to keep slipping and not gripping?
Stage 2 MK5 GTI Revo GONE
Stage 1+ MK5 GTI R-Tech GONE
Stage 2 MK5 GTI Edition 30 GoAPR

Offline EddieA

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 5
  • Posts: 119
Re: AIRTEC & FORGE Twintercooler Owners HELP?!
« Reply #7 on: July 26, 2014, 07:05:45 am »
I had the same thing happen to me, I ended up using mikalor clamps to hold them on. But one thing I also did was clean up the pipe from any oil and then used some emery paper to slightly roughen the inside of the pipe and then on the connector just to give it a little more purchase
Edition 30 TTE420 - number 470 - RTech 418bhp and 391lbft

Offline DANBOY66

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 41
  • -Receive: 55
  • Posts: 1137
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,74301.0.html
Re: AIRTEC & FORGE Twintercooler Owners HELP?!
« Reply #8 on: July 26, 2014, 07:21:05 am »
Whoosh what size clamp is it I have some good clamps at home I can bring it along Sunday if your still stuck
Dan..

Seat Ibiza cupra 06 1.8T GTX2867R GEN2 track toy in the making
Passat TDI 170 DSG the Family mini cab

Offline Wooosh

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 6
  • -Receive: 87
  • Posts: 1894
  • Factory ponies.
    • Email
Re: AIRTEC & FORGE Twintercooler Owners HELP?!
« Reply #9 on: July 26, 2014, 02:02:57 pm »
I had the same thing happen to me, I ended up using mikalor clamps to hold them on. But one thing I also did was clean up the pipe from any oil and then used some emery paper to slightly roughen the inside of the pipe and then on the connector just to give it a little more purchase
Has it not come off since? You got the link for where you bought them from.

Whoosh what size clamp is it I have some good clamps at home I can bring it along Sunday if your still stuck
I can't remember mate same size as the 1's at GTI Inters? You got mikalor clamps or something else.
Stage 2 MK5 GTI Revo GONE
Stage 1+ MK5 GTI R-Tech GONE
Stage 2 MK5 GTI Edition 30 GoAPR

Offline EddieA

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 5
  • Posts: 119
Re: AIRTEC & FORGE Twintercooler Owners HELP?!
« Reply #10 on: July 26, 2014, 02:08:48 pm »
I just ordered ones from eBay, arrived wishing a couple of days, and nope not come off since at all buddy
Edition 30 TTE420 - number 470 - RTech 418bhp and 391lbft

Offline Wooosh

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 6
  • -Receive: 87
  • Posts: 1894
  • Factory ponies.
    • Email
Re: AIRTEC & FORGE Twintercooler Owners HELP?!
« Reply #11 on: July 26, 2014, 02:31:49 pm »
I just ordered ones from eBay, arrived wishing a couple of days, and nope not come off since at all buddy
PM'd mate.
Stage 2 MK5 GTI Revo GONE
Stage 1+ MK5 GTI R-Tech GONE
Stage 2 MK5 GTI Edition 30 GoAPR

Offline toosmiles

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 22
  • -Receive: 18
  • Posts: 635
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,92286.0.html
Golf R mk6 R-tech tuned GTX3071r

Offline DANBOY66

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 41
  • -Receive: 55
  • Posts: 1137
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,74301.0.html
Re: AIRTEC & FORGE Twintercooler Owners HELP?!
« Reply #13 on: July 26, 2014, 04:05:37 pm »
Woosh them clamps are rubbish compared to the clamps I have

You need this type eBay number  400747341357

Can't post direct link as on phone in. Cyprus
Dan..

Seat Ibiza cupra 06 1.8T GTX2867R GEN2 track toy in the making
Passat TDI 170 DSG the Family mini cab

Offline DANBOY66

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 41
  • -Receive: 55
  • Posts: 1137
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,74301.0.html
Re: AIRTEC & FORGE Twintercooler Owners HELP?!
« Reply #14 on: July 26, 2014, 04:10:31 pm »
I have a bag of all different sizes I will bring it along with me to the Essex meet tomorrow
Dan..

Seat Ibiza cupra 06 1.8T GTX2867R GEN2 track toy in the making
Passat TDI 170 DSG the Family mini cab