Author Topic: Watercooled cc10 wheels (Read 2860 times)

-luke-gti · « **on:** July 21, 2014, 08:36:19 pm »

Has any one got or had watercooled cc10 wheels
If so what off set & width wheel was you running? Did you roll your arches? Size tyres?
Thanks

George10 · « **Reply #1 on:** July 21, 2014, 10:10:05 pm »

All those questions depend how low you are? Static or air?

Here's a lad I knows car, running 18x8.5 and 18.9.5 et 35 all round

-luke-gti · « **Reply #2 on:** July 22, 2014, 07:22:29 pm »

I'm static & what et would you reconmend running

George10 · « **Reply #3 on:** July 22, 2014, 08:24:44 pm »

Depending on widths anything about 35 et

-luke-gti · « **Reply #4 on:** July 23, 2014, 08:52:43 pm »

I'm looking at goin 8.5 all round & just worried about them being to close to the arch so I'd have to raise it up more

CarlW · « **Reply #5 on:** July 23, 2014, 09:15:05 pm »

ET35 is pretty much flush with the arch. i would personally say ET40 - 42 on a static car with 8.5's in all corners.

George10 · « **Reply #6 on:** July 23, 2014, 11:18:13 pm »

I'm looking at goin 8.5 all round & just worried about them being to close to the arch so I'd have to raise it up more

8.5 all round is fine. Pull and roll your archers for that extra 10mm or what ever.

I'm pretty sure watercooled do those in 8.5 et45

-luke-gti · « **Reply #7 on:** July 24, 2014, 09:31:03 pm »

Ok cheers mate also what size tyre Would you recommend on a 8.5J with a nice stretch

George10 · « **Reply #8 on:** July 25, 2014, 09:24:05 am »

215/35/18 dude