How to fit Auto Polar Fis + To a MK5 ED30?

[edition30jmr]

Hi guys does anyone how to access the can gateway etc and fit one of these as i would love one!?

Thanks 

[rich83]

Its a PITA... You have to remove the compartment below the headlight switch and surrounding trim. Then remove the relay board. Then wrestle with the CAN module to get it out and disconnect. Its worth it. 

[edition30jmr]

How does that cubby hole come out? And what is PITA sorry 

Thanks

[rich83]

Pain in the ass.

[edition30jmr]

Haha 

How do you remove the little storage fold down box under the light controls?

Thanks

[bacillus]

How do you remove the little storage fold down box under the light controls?

Just squeeze the sides towards each other and open the cubby further then pull out the whole thing.

[edition30jmr]

Okay great  il give it a try afterwards!

[Matto]

It also depends what year your car is as there are varying locations  for the Canbus. I removed the scuttle panel, wipers and wiper mechanism and the cover underneath to gain access. Worth the extra 15 mins not having to wrestle behind the fuse board.

I also fed the cable into the little cubby hole under the light switch to connect to the Polar unit so it can be easily accessed for firmware updates.

[bacillus]

I also fed the cable into the little cubby hole under the light switch to connect to the Polar unit so it can be easily accessed for firmware updates.

Matt I assume you mean an usb cable?

[rich83]

I also fed the cable into the little cubby hole under the light switch to connect to the Polar unit so it can be easily accessed for firmware updates.

Matt I assume you mean an usb cable?

well if mat has done what I have done then he has got the polar lead (that plugs into the polar unit) in the 'cubby hole' and the polar unit resides in there

[Matto]

Rich is correct. The lead that piggy backs into the Canbus feeds into the chubby hole which is where I keep the polar box itself