Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Photo request  (Read 3750 times)

Offline Phil@BSH

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 21
    • Email
Photo request
« on: October 30, 2009, 08:07:58 pm »
Hello all, I was unsure where to put this topic but I think this should be ok. We are working on an International specific fitting solution for our Competition and Race catch can systems. We have a theory on how we can accomplish this but before creating mock ups I need to gather a little bit more information. This will be a two part question and thank you anyone who wants to help.

First step is getting an image. Ive attached a modified photo of MonkGTis engine bay taken from a thread on here. What I need is a photo of the engine bay looking straight down towards the ground specifically of the area boxed in Red. I am trying to gauge the space available in this area.



Thanks again to anyone who can help.
Logged
513 bhp at 24 psi. More still to come!
BSH Speedshop
info@bshspeedshop.com

Help us work with you. If we make a part that you want and it needs special Euro fitments please contact tech@bshspeedshop.com

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Photo request
« Reply #1 on: October 30, 2009, 08:11:11 pm »


^ Any help? ^

I've got more but just need a short time to find and upload.
Logged


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline SteveP

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 117
  • -Receive: 340
  • Posts: 6005
    • My Project
Re: Photo request
« Reply #2 on: October 30, 2009, 08:12:03 pm »
Try these from my Catch Can install  :smiley:





Logged

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Photo request
« Reply #3 on: October 30, 2009, 08:24:12 pm »


Logged


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline QD MBE

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 15
  • -Receive: 102
  • Posts: 2497
Re: Photo request
« Reply #4 on: October 30, 2009, 08:31:18 pm »
Quote from: Phil@BSH on October 30, 2009, 08:07:58 pm
Hello all, I was unsure where to put this topic but I think this should be ok. We are working on an International specific fitting solution for our Competition and Race catch can systems. We have a theory on how we can accomplish this but before creating mock ups I need to gather a little bit more information. This will be a two part question and thank you anyone who wants to help.

First step is getting an image. Ive attached a modified photo of MonkGTis engine bay taken from a thread on here. What I need is a photo of the engine bay looking straight down towards the ground specifically of the area boxed in Red. I am trying to gauge the space available in this area.



Thanks again to anyone who can help.

Plenty at the beginning of this thread.

http://www.mk5golfgti.co.uk/forum/index.php?topic=7057.0
Logged

Offline Phil@BSH

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 21
    • Email
Re: Photo request
« Reply #5 on: October 30, 2009, 09:08:23 pm »
Awesome guys, thank you so much. That charcoal canister is a bit bigger then I thought! Next and final step will be to see if someone can get me a measurement between these two points so I know what space there truly is. With that I can confirm or deny my fitment theory.



Thanks!
Logged
513 bhp at 24 psi. More still to come!
BSH Speedshop
info@bshspeedshop.com

Help us work with you. If we make a part that you want and it needs special Euro fitments please contact tech@bshspeedshop.com

Offline QD MBE

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 15
  • -Receive: 102
  • Posts: 2497
Re: Photo request
« Reply #6 on: October 31, 2009, 09:39:19 am »
Phil,

Just dragged the car out and measured.  It is about 6" although my GF didn't believe it.
 :happy2:
Logged

Offline Phil@BSH

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 21
    • Email
Re: Photo request
« Reply #7 on: October 31, 2009, 08:25:17 pm »
Haha, well played. I apologize for not being properly specific, the distance I am looking for is marked in green in this modified image.

Logged
513 bhp at 24 psi. More still to come!
BSH Speedshop
info@bshspeedshop.com

Help us work with you. If we make a part that you want and it needs special Euro fitments please contact tech@bshspeedshop.com

Offline QD MBE

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 15
  • -Receive: 102
  • Posts: 2497
Re: Photo request
« Reply #8 on: November 01, 2009, 07:54:34 am »
Quote from: Phil@BSH on October 31, 2009, 08:25:17 pm
Haha, well played. I apologize for not being properly specific, the distance I am looking for is marked in green in this modified image.



Phil,

Not sure what you want...............  The picture just shows a green dot.

Logged

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Photo request
« Reply #9 on: November 01, 2009, 04:00:24 pm »
^^^^
Phil, do you want the horizontal measurement from the aircon tap to the side of the charcoal can? And also the vertical height of the charcoal can body (excluding top stuff)?

Or are you wanting the vertical measurement from the top of the aircon tap to the top of the charcoal can's body?

Imperial or metric?
Logged


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline Phil@BSH

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 21
    • Email
Re: Photo request
« Reply #10 on: November 01, 2009, 09:03:34 pm »
The horizontal measurement from the aircon tap to the lip of the charcoal canister please. Imperial is most simple for us, metric is fine as well.
Logged
513 bhp at 24 psi. More still to come!
BSH Speedshop
info@bshspeedshop.com

Help us work with you. If we make a part that you want and it needs special Euro fitments please contact tech@bshspeedshop.com

Offline QD MBE

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 15
  • -Receive: 102
  • Posts: 2497
Re: Photo request
« Reply #11 on: November 02, 2009, 06:32:38 pm »
Phil,

Just taken the measurement, and it is 35mm or 1 3/8".  Hope that helps.

Dave
Logged
Pages: [1]   Go Up
« previous next »