Make a donation
« previous next »
Pages: 1 2 3 [4] 5   Go Down

Author Topic: P3 Boost Gauges  (Read 17972 times)

Offline STV4R

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 2
  • Posts: 107
Re: P3 Boost Gauges
« Reply #45 on: October 11, 2014, 06:38:00 pm »
It turns on but nothing works. i.e boost, coolant temp etc.. boost just stays at -26 and doesn't move, coolant temp stops on 0 as does the others. The only one that works is the battery. So I'm guessing it's not connected properly. So would like to see a picture of someone's connected to the obd2 to see if mines pushed in far enough or not.
Logged

Offline NotNormal

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 6
  • Posts: 317
    • Email
Re: P3 Boost Gauges
« Reply #46 on: October 11, 2014, 08:36:58 pm »
Quote from: STV4R on October 11, 2014, 06:38:00 pm
It turns on but nothing works. i.e boost, coolant temp etc.. boost just stays at -26 and doesn't move, coolant temp stops on 0 as does the others. The only one that works is the battery. So I'm guessing it's not connected properly. So would like to see a picture of someone's connected to the obd2 to see if mines pushed in far enough or not.

It's working fine, you need to set it up
If your car has a remap it needs putting on a certain channel, the boost needs setting to what you'd like it to read in, bar or psi, like wise the coolant, deg c or deg f
So on and so forth

If you read the set up instructions online it will guide you though it
It's not difficult to do
The leaflet that comes in the box does clearly say to look at the online setup guide

Here is the configuration guide for vw/Audi :

http://www.p3cars.com/content/pdf/vag-config.pdf

Hope it helps, if you're struggling further pm me and I'll give you my mobile number and I'll walk you through it tomorrow

Tom
Logged
Don't judge me by your ability !
__________________________________

Current daily crapper - Audi A6 Avant 3.0tdi SLine Quattro

Previous favourite rides :

BMW E92 335d M/Sport (351/520)
BMW  E92 335d SE (339/500)
Golf MK5 GT170 Diesel Sport (220/330)
Audi S4 (B6) - Noggy blue (366bhp)
Evo VI (6 ;) ) RSII - Scotia White (420bhp)
Astravan Sportive 1.9 CDTi - 190bhp
Astra GTE (MK2) Turbo (

Offline TommyR

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 20
  • Posts: 354
  • Black Edition 30
Re: P3 Boost Gauges
« Reply #47 on: October 12, 2014, 09:30:23 am »
@STV4R Got it working yet dude? Like NotNormal said you need to change the settings. Like the default engine is TSI so that needs changing to TFSI :happy2:
Logged

Offline STV4R

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 2
  • Posts: 107
Re: P3 Boost Gauges
« Reply #48 on: October 12, 2014, 01:12:49 pm »
Still not working
Logged

Offline heavyd

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 29
  • Posts: 1372
    • Email
Re: P3 Boost Gauges
« Reply #49 on: October 12, 2014, 06:58:52 pm »
Think I'll get one ordered next week
Logged

Offline STV4R

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 2
  • Posts: 107
Re: P3 Boost Gauges
« Reply #50 on: October 14, 2014, 05:13:16 pm »
So, it turns out they sent me the wrong one for my car. 2006+ and my car is a 2005. They are now sending me out a new chip "free of charge"
Fingers crossed that when it arrives it works  :happy2:
Logged

Offline marko

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 16
  • -Receive: 33
  • Posts: 903
    • Email
Re: P3 Boost Gauges
« Reply #51 on: October 14, 2014, 05:35:40 pm »
They don't ship outside uk...thats poor..
Logged
2007 TR gt170...heated leather,underseat drawers,auto-levelling bi-xenons,puddle leds,chrome switches,footwell lights f+r,cruise control and ed30 rear lamps,LED interior....carbon highline clocks,ed30 front spoiler,RNS 510 P+MDI,mk6 gti gearknob,TPMS done,complete r32 trim kit+ MFSW,r32 f+r brakes,RLS fitted.headlamp washers,folding mirrors and boot pop,mk6 RVC,19"Helios,AP coilies,valeo LEDs  ...dpf delete and remap to finish off

Offline lukemk5gti

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 28
  • -Receive: 118
  • Posts: 1845
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,89715.msg907250.html#msg907250
Re: P3 Boost Gauges
« Reply #52 on: October 14, 2014, 07:14:34 pm »
Quote from: marko on October 14, 2014, 05:35:40 pm
They don't ship outside uk...thats poor..

They do! I was speaking to the owner there. £12.75 registered post

I was saying to him that a couple of us in Ireland might be interested which would lower the shipping cost. You in?
Logged

Offline GTi-Andy

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 20
  • -Receive: 17
  • Posts: 602
    • Email
P3 Boost Gauges
« Reply #53 on: October 14, 2014, 07:57:19 pm »
These are back up for sale now on kleen freaks, but now at £220 a pop!

An extra £10 if ya wanna change the colour and £25 for the boost gauge.

Then another £7.95 for postage.

Seems expensive now, for that reason I'm out!
« Last Edit: October 14, 2014, 09:13:24 pm by GTi-Andy »
Logged


So much for keeping it standard!

Offline TommyR

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 20
  • Posts: 354
  • Black Edition 30
Re: P3 Boost Gauges
« Reply #54 on: October 15, 2014, 05:53:49 pm »
Quote from: GTi-Andy on October 14, 2014, 07:57:19 pm
These are back up for sale now on kleen freaks, but now at £220 a pop!

An extra £10 if ya wanna change the colour and £25 for the boost gauge.

Then another £7.95 for postage.

Seems expensive now, for that reason I'm out!

Saw this last night... Shame really it's like they got a few over cheap to get the word out and then conveniently increase the price for the second lot, once more people started wanting them.
Logged

Offline Mandy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 95
  • -Receive: 94
  • Posts: 1701
  • Drink Russian, Wear Italian, Drive German :)
Re: P3 Boost Gauges
« Reply #55 on: October 15, 2014, 06:50:32 pm »
We've noticed that the P3 gauge is interfering with the DAB, can't get any signal when the P3 is installed. Unplug it and DAB will work fine again. Anybody have any idea how to get around this? :rolleye:
Logged
................................................
Driving: Tornado Red MK7 GTD, BMW 330e
Drove: Rising Blue Golf 6R, Reflex Silver Edition30 No.1684, Tornado Red Mk5 Golf GTI

Offline DrG_GTi

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 3
  • Posts: 127
Re: P3 Boost Gauges
« Reply #56 on: October 16, 2014, 12:08:36 pm »
Finally got mine fitted. Looks and functions well.
Those with mk5 gti that are mapped, how do you have your configuration set up, car.0 or car.1, and bst.f or bst.d?
http://www.p3cars.com/vag-install

I only ask as I'm using car.0 and bst.f right now as I'm running rtech st1 and boost is reading 21.7 on full throttle and vacuum -20.5 when coasting...

Cheers.
« Last Edit: October 16, 2014, 07:28:16 pm by DrG_GTi »
Logged

Offline TommyR

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 20
  • Posts: 354
  • Black Edition 30
Re: P3 Boost Gauges
« Reply #57 on: October 16, 2014, 06:57:07 pm »
Car 0, bSt.f for me! But from what I have read on the forums the f setting was made for the APR flashes to get them reading correctly, which suits me down to the ground :smiley:

More info here...

http://forums.vwvortex.com/showthread.php?6046760-P3cars-FSI-motors-(MK5-GTI-MK6-Golf-R)-and-APR-Tunes/page2
Logged

Offline heavyd

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 29
  • Posts: 1372
    • Email
Re: P3 Boost Gauges
« Reply #58 on: October 16, 2014, 07:46:27 pm »
So in general, for the people that have already installed these, do they think theyre worth the money? or is the polar fis a better option?
Logged

Offline TommyR

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 20
  • Posts: 354
  • Black Edition 30
Re: P3 Boost Gauges
« Reply #59 on: October 16, 2014, 08:48:41 pm »
Quote from: heavyd on October 16, 2014, 07:46:27 pm
So in general, for the people that have already installed these, do they think theyre worth the money? or is the polar fis a better option?

I'm more than happy with mine... In regards to a comparison though I can't compare as I only have Midline clocks, so I would of had to upgrade them first before I could get a polar box which would have made things costly. Pretty sure @Mandy has had both though :happy2:
Logged
Pages: 1 2 3 [4] 5   Go Up
« previous next »