Make a donation

Author Topic: de catting standard exaust  (Read 3098 times)

Offline Jayy26

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 4
  • Posts: 340
    • Email
de catting standard exaust
« on: August 29, 2014, 02:42:59 am »
Hi i was going to buy a standard gti downpipe etc and remove the cat to basically make a cheaper makeshift decat (Y) haha

anybody done this etc?

just wanting a little more noise and more freeflowing...

car has revo remap,,,,260-270bhp
miltek backbox...


cheers

Offline howie1987

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 92
  • -Receive: 20
  • Posts: 527
    • Email
Re:
« Reply #1 on: August 29, 2014, 02:54:32 am »
You could remove the pre cat. I have a standard down pipe with pre cat removed forsale as of next week it will be in the forsale section with the cat.

Offline Stooey

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 4
  • Posts: 219
    • Email
Re:
« Reply #2 on: August 29, 2014, 10:21:29 am »
You could remove the pre cat. I have a standard down pipe with pre cat removed forsale as of next week it will be in the forsale section with the cat.

What difference to performance and noise does removing the pre cat make?

Offline Frenzy

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 62
  • -Receive: 29
  • Posts: 653
Re:
« Reply #3 on: August 29, 2014, 11:06:26 am »
You could remove the pre cat. I have a standard down pipe with pre cat removed forsale as of next week it will be in the forsale section with the cat.

What difference to performance and noise does removing the pre cat make?

Slightly deeper exhaust note and maybe 5bhp  :smiley:

Offline Jayy26

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 4
  • Posts: 340
    • Email
Re: de catting standard exaust
« Reply #4 on: October 18, 2014, 07:30:21 pm »
i didnt see much off a difference tbh :/ but mine was already mapped and has milltek back box (Y)

as im on about noise etc..

Ive took my pre cat out and got a milltek back box..

has anybody got any clips off there different variations and exaust?

fancy a decat but dont want to be stupid noise..

Offline Wash

  • Always Involved
  • ****
  • Thank You
  • -Given: 4
  • -Receive: 10
  • Posts: 163
Re: de catting standard exaust
« Reply #5 on: October 18, 2014, 08:09:57 pm »
I have a 3" exhaust (no cats at all) all the way back to a non-resonated milltek backbox and I think it sounds amazing. When you're not on it, it sounds almost exactly like stock but perhaps a TINY bit louder from the inside but as soon as you start going into boost it makes an awesome roar.

I can probably make a video if you want showing what it's like?

Offline Dave(tm)

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 12
  • Posts: 283
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,89462.0.html
Re: de catting standard exaust
« Reply #6 on: October 18, 2014, 08:15:47 pm »
I have a 3" exhaust (no cats at all) all the way back to a non-resonated milltek backbox and I think it sounds amazing. When you're not on it, it sounds almost exactly like stock but perhaps a TINY bit louder from the inside but as soon as you start going into boost it makes an awesome roar.

I can probably make a video if you want showing what it's like?

I'd be very interested in this if you found time :-)

Dave

Offline Wash

  • Always Involved
  • ****
  • Thank You
  • -Given: 4
  • -Receive: 10
  • Posts: 163
Re: de catting standard exaust
« Reply #7 on: October 18, 2014, 08:18:59 pm »
I'll make a video tomorrow then. I'll include bits showing what it's like driving around sensibly and what it sounds like when you put your foot on the loud pedal.  :happy2:

Offline grumpy

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 5
  • Posts: 74
Re: de catting standard exaust
« Reply #8 on: October 18, 2014, 08:32:29 pm »
Hi mate,
I de-catted my standard downpipe and didn't notice any difference in noise whatsoever. I didn't remove the pre-cat though. Then I fitted a bcs de-cat downpipe (mated to standard cat-back) and now I love the sound.

Thanks.

Offline Jayy26

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 4
  • Posts: 340
    • Email
Re: de catting standard exaust
« Reply #9 on: October 18, 2014, 08:34:16 pm »
sound clip would be awesome..

ill make one tonight just so people can tell the difference :)

is they any way off finding out if the back box is res or not?

Offline Wash

  • Always Involved
  • ****
  • Thank You
  • -Given: 4
  • -Receive: 10
  • Posts: 163
Re: de catting standard exaust
« Reply #10 on: October 19, 2014, 09:33:18 pm »
Not really the best videos and the sound does absolutely no justice to what the car sounds like in real life but might be useful anyway...

First video shot from inside, when I'm not putting my foot down the car is pretty much the same as stock...
NkuOw

Videos from outside...

NkuOw&index=2
NkuOw


Probably worth mentioning my car also has an Audi S3 engine with a cold air intake and a stage 2 map from r-tech... lol

Offline gerbil

  • Taking part
  • ***
  • Thank You
  • -Given: 3
  • -Receive: 1
  • Posts: 36
    • Email
Re: de catting standard exaust
« Reply #11 on: October 19, 2014, 11:06:56 pm »
I have a eurojet decat mated to a standard cat back on my ED30... It makes slightly more noise but nothing over the top. Most noticeable on tickover while cold.
2007 Edition 30 Black

Offline ED30GTI

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 38
Re: de catting standard exaust
« Reply #12 on: October 22, 2014, 08:35:46 am »
I have a 3" exhaust (no cats at all) all the way back to a non-resonated milltek backbox and I think it sounds amazing. When you're not on it, it sounds almost exactly like stock but perhaps a TINY bit louder from the inside but as soon as you start going into boost it makes an awesome roar.

I'd agree with this , as I've got a full decat system with non res miltek , and just driving round normal it's not loud at all , it's a deeper tone than stock but not loud , but when on it , it sounds mint :)

Offline GrayMK5GTI

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 125
  • -Receive: 248
  • Posts: 4165
Re: de catting standard exaust
« Reply #13 on: October 22, 2014, 12:34:34 pm »
I'm about to get a downpipe & 200CEL sports cat to mate to my OEM system  :happy2:

More info on pre-cat removal: http://www.mk5golfgti.co.uk/forum/index.php?topic=41083.0
NOW: 2015 Golf R DSG 5 Door, Lapiz Blue, 19s, Discover Nav, Reversing Camera
GONE:2007 Black GTI Edition 30 3dr

Offline mvb12

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 15
  • -Receive: 64
  • Posts: 1539
  • VCDS - Adaptations * Coding * Diagnostics PM Me
    • Email
Re: de catting standard exaust
« Reply #14 on: October 22, 2014, 01:13:05 pm »
I have a zoorst up for grabs if someone wants to smash that up.

http://www.mk5golfgti.co.uk/forum/index.php/topic,90075.0.html

 :ashamed:
VCDS HEX NET / VCP / ODIS - COVERING LONDON AND MIDLANDS
VCDS - Adaptations * Coding * Diagnostics PM Me
Canbus Gateway - Supply and fit (Stop battery drain issues)