Make a donation

Author Topic: Front VW badge  (Read 8630 times)

Offline Vick N

  • Always Involved
  • ****
  • Thank You
  • -Given: 16
  • -Receive: 0
  • Posts: 150
    • Email
Re: Front VW badge
« Reply #30 on: October 31, 2009, 12:16:06 am »
It easy. I just grabbed hold by putting my fingers in the holes in between the V and the W and turn it to the left. It should then just pull out! :happy2:

Thanks buddy, I will give it a try tomorrow  :happy2:

Offline Rich

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 8
  • Posts: 1054
  • Buy Land, They Don't Make It Anymore
    • Carpet Underlay
    • Email
Re: Front VW badge
« Reply #31 on: October 31, 2009, 10:27:28 am »
Carlo,

I agree with you, i couldnt picture my badge black... i didnt seem to think it would go well with silver.

You dont need to do anything with the once you've lowered the car.

Keep it subtle looking  :happy2:
~ Golf MK5 Pirelli ~ 36k Miles and continuing!

Offline monte

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 116
  • -Receive: 134
  • Posts: 2747
  • Global Ruler
    • Deep-Shine Detail. Detailing-Wrapping-Tints. Lincoln.
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,67679.0.html
Re: Front VW badge
« Reply #32 on: October 31, 2009, 10:29:59 am »
^^^ you got the stubby sharan aerial sorted yet Rich?^^^

Offline Rich

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 8
  • Posts: 1054
  • Buy Land, They Don't Make It Anymore
    • Carpet Underlay
    • Email
Re: Front VW badge
« Reply #33 on: October 31, 2009, 06:09:02 pm »
yes yes i've got one on now :)

Got it last week... very subtle mod  :smiley: :smiley:


 :drinking:
~ Golf MK5 Pirelli ~ 36k Miles and continuing!

Offline Top Cat

  • Top cat
  • Just look at my post count
  • ******
  • Thank You
  • -Given: 171
  • -Receive: 335
  • Posts: 8196
  • Almost Jacamo
Re: Front VW badge
« Reply #34 on: October 31, 2009, 09:42:35 pm »
It easy. I just grabbed hold by putting my fingers in the holes in between the V and the W and turn it to the left. It should then just pull out! :happy2:

Thanks buddy, I will give it a try tomorrow  :happy2:

If you do it this way you can easy snap the clips.  :sad1:

It only takes about 2 minutes to take the grill off and do it properly. 4 torx screws and its done.  :happy2:

Offline Vick N

  • Always Involved
  • ****
  • Thank You
  • -Given: 16
  • -Receive: 0
  • Posts: 150
    • Email
Re: Front VW badge
« Reply #35 on: November 03, 2009, 11:24:36 pm »
It easy. I just grabbed hold by putting my fingers in the holes in between the V and the W and turn it to the left. It should then just pull out! :happy2:

Thanks buddy, I will give it a try tomorrow  :happy2:

If you do it this way you can easy snap the clips.  :sad1:

It only takes about 2 minutes to take the grill off and do it properly. 4 torx screws and its done.  :happy2:

Or dear mate, I did it and only just read your post!!  :sad1: The clips broke!! Having a new one under warranty hopefully when it goes in  :signLOL:  :popcornsoda:

Offline monte

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 116
  • -Receive: 134
  • Posts: 2747
  • Global Ruler
    • Deep-Shine Detail. Detailing-Wrapping-Tints. Lincoln.
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,67679.0.html
Re: Front VW badge
« Reply #36 on: November 04, 2009, 09:41:49 am »
Damn :jumping: I read TC's post too and I was hoping it would all go smoothly for you mate. If I would have known there was any risk of breakage I would not have suggested this  :sad1: I read the twist method somewhere and went straight ahead and did it. I had no problems with mine, although I did notice after taking it out and putting it back in alot of times, it did feel a little looser.

I will edit my earlier post now, so that others that may read the thread wont use this method :happy2:

Offline Garth

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 4
  • -Receive: 14
  • Posts: 605
    • My Build thread
Re: Front VW badge
« Reply #37 on: November 04, 2009, 09:45:18 am »
I took mine out by simply sticking my fingers in, rotating it anti-clockwise then pulling out. That's the way it's meant to be done according to VW. I had no problems when I did this. You must have been unlucky  :confused:

Offline winrya

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 7
  • -Receive: 16
  • Posts: 997
Re: Front VW badge
« Reply #38 on: November 04, 2009, 10:18:55 am »
I took mine out by simply sticking my fingers in, rotating it anti-clockwise then pulling out. That's the way it's meant to be done according to VW. I had no problems when I did this. You must have been unlucky  :confused:

I did the same, came out very easily without any damage

Offline Greeners

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 201
  • -Receive: 199
  • Posts: 8812
    • Email
Re: Front VW badge
« Reply #39 on: November 04, 2009, 01:26:04 pm »
Damn :jumping: I read TC's post too and I was hoping it would all go smoothly for you mate. If I would have known there was any risk of breakage I would not have suggested this  :sad1: I read the twist method somewhere and went straight ahead and did it. I had no problems with mine, although I did notice after taking it out and putting it back in alot of times, it did feel a little looser.

I will edit my earlier post now, so that others that may read the thread wont use this method :happy2:

See reply number #18  :innocent:

Offline Vick N

  • Always Involved
  • ****
  • Thank You
  • -Given: 16
  • -Receive: 0
  • Posts: 150
    • Email
Re: Front VW badge
« Reply #40 on: November 04, 2009, 05:16:05 pm »
Damn :jumping: I read TC's post too and I was hoping it would all go smoothly for you mate. If I would have known there was any risk of breakage I would not have suggested this  :sad1: I read the twist method somewhere and went straight ahead and did it. I had no problems with mine, although I did notice after taking it out and putting it back in alot of times, it did feel a little looser.

I will edit my earlier post now, so that others that may read the thread wont use this method :happy2:

Dude your way worked fine but when I removed it I was bending the clips and managed to snap one as it felt loose so i was 'adjusting' then to make it tighter  :ashamed: