Audi TTRS brakes

[A1SGP]

Can anybody tell me if the TTRS brakes will fit 18" wheels , or have you got to have 19"s . And to anybody that has them what do you think of them ?

[rich83]

18s will work but with OEM wheels youll need a spacer.

[dansmith180]

18's are tight supposedly not all 18's will fit over them (depends on design), you can get these calipers to fit onto R32 345m discs with some DaveB brackets

[A1SGP]

Cheers for the help , I'll be using the 18" pirelli wheels .

[scooba]

I think I read the 18" BBS VZs work with bigger brakes

[Stig_gti]

What size spacers to fit 18" monzas

[rich83]

What size spacers to fit 18" monzas

I am using 8mm with pescaras.... so i would say 8-10 and yourll be fine.

[Stig_gti]

What size spacers to fit 18" monzas

I am using 8mm with pescaras.... so i would say 8-10 and yourll be fine.

 

[Stig_gti]

Would I need bigger then 8-10mm spacers if I'm running the calipers with r32 discs.

[bluo]

Interested in this too! Any updates to your query??

[rich83]

Would I need bigger then 8-10mm spacers if I'm running the calipers with r32 discs.

Doubt it.

[dansmith180]

The clearance is the same for the R32 and TTRS discs as the bracket is just an new carrier that moves the calipers closer into the disc. As for a review, they're f*cking awesome, I run them with drilled and grooved TTS discs (lighter than R32 ones) and Brembo sport pads and they stop hard time and time again I would highly recommend them.

[George10]

You can fit them behind 18's with spacers, but it's the et on wheels you've got to be careful of.

[TommyR]

For an OEM wheel i.e ET51 and 7.5j on a 340/345mm disc you need a 12mm spacer.

[Stig_gti]

For an OEM wheel i.e ET51 and 7.5j on a 340/345mm disc you need a 12mm spacer.

What about pro race 1.2 et45 18"