Make a donation

Author Topic: milltek exhaust reducer  (Read 1312 times)

Offline biffobear

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 12
  • Posts: 367
    • Email
milltek exhaust reducer
« on: September 22, 2014, 01:37:40 pm »
hi, has anyone got a spare reducer from milltek intermediate pipe to standard gti exhaust, thanks

Offline th3_f15t

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 66
  • -Receive: 183
  • Posts: 2676
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,101525.0.html
Re: milltek exhaust reducer
« Reply #1 on: September 22, 2014, 04:15:56 pm »
Have you contacted Milltek directly to see if they can supply you with one, or you after a used one to save some funds?

Moving over to Flickr, sorry for the broken picture links!

Offline biffobear

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 12
  • Posts: 367
    • Email
Re: milltek exhaust reducer
« Reply #2 on: September 22, 2014, 04:48:17 pm »
here,s why, Many thanks for your email.

 

With regards your enquiry an adaptor is not available for the installation of the high flow downpipe and sports cat onto the OE system.

 

Due to the diameter differences and the restrictions within the OE system the heat build up within the downpipe and sports cat would cause damage and premature failure of the catalyst assembly, especially if used with additional hardware changes and software changes.

 


Regards

 

Leigh Ravey