Make a donation

Author Topic: Ferodo DS2500 no wear indicator?!  (Read 1587 times)

Offline Nico2904

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 0
  • Posts: 185
    • Email
Ferodo DS2500 no wear indicator?!
« on: September 25, 2014, 05:09:32 pm »
Just bought a set for the front for my mk5 GTI (standard brakes 312 mm). But there is no wear sensor/indicator on them. What to do about this. What have you guys done?

Cheers  :happy2:

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6328
Re: Ferodo DS2500 no wear indicator?!
« Reply #1 on: September 25, 2014, 05:15:47 pm »
You can either short the sensor wire (ghetto method) or code it out in vcds.   :smiley:
Without traction power is nothing!

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=004e8tvr589fh1ksdiohk0md9g&/topic,19740.0.html
Re: Ferodo DS2500 no wear indicator?!
« Reply #2 on: September 25, 2014, 05:16:18 pm »
Coding it out with VCDS is the proper way to do it...

or

Pull the wear sensor wire off the old brake pad, and connect it back to the car and short the wires together.


edit.... too slow!

Offline Nico2904

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 0
  • Posts: 185
    • Email
Re: Ferodo DS2500 no wear indicator?!
« Reply #3 on: September 25, 2014, 05:18:24 pm »
aha. Thanks guys!  :happy2: much appreciated