Neuspeed Hi-Flow Intercooler Pipe

[yin]

Neuspeed Hi-Flow Intercooler Pipe

http://www.awesome-gti.co.uk/product.php?xProd=6766&xSec=360

Does the above fit the Ko4 Tfsi cars

[jonnyc]

Neuspeed Hi-Flow Intercooler Pipe

http://www.awesome-gti.co.uk/product.php?xProd=6766&xSec=360

Does the above fit the Ko4 Tfsi cars

It will fit but you will have to weld on a take off for the DV re route that the K04 cars have..

[yin]

Neuspeed Hi-Flow Intercooler Pipe

http://www.awesome-gti.co.uk/product.php?xProd=6766&xSec=360

Does the above fit the Ko4 Tfsi cars

It will fit but you will have to weld on a take off for the DV re route that the K04 cars have..

Thanks for that jonnyc

[Tfsi_Mike]

Been trying to find out if fitting this will see any notable gains....

[chungster]

or go atmospheric on the DV 

[jonnyc]

or go atmospheric on the DV 

That wouldn't be a great idea on one of these engines.. The MAF and MAP sensors rely on all of the measured air staying in the system..

[yin]

Been trying to find out if fitting this will see any notable gains....

Yanks on vortex claim 5-7bhp but no plots to back this up.They claim the same for the neuspeed pulleys too

JBS do a eurojet version as well

http://www.jbsautodesigns.co.uk/product/925/throttle-body-hardpipe-kit

[chungster]

or go atmospheric on the DV 

That wouldn't be a great idea on one of these engines.. The MAF and MAP sensors rely on all of the measured air staying in the system..

yup i kno that JC...just throwing the option out there as it is a possibilty. It used to be a prob on the old 1.8 20VT motor but then people started to run 100% atmos with no probs. I tried the Forge one on my Cupra 20VT and it caused limp mode everytime!

so yeah i wouldn't recommend it either based on my history

[Tfsi_Mike]

So 10 - 15 bhp claimed, hmmmm

[chungster]

a fatter IC > TB pipe defo helps...i tested the SFS one and it gave 10bhp extra on a K03.

[yin]

Neuspeed Hi-Flow Intercooler Pipe

http://www.awesome-gti.co.uk/product.php?xProd=6766&xSec=360

Does the above fit the Ko4 Tfsi cars

It will fit but you will have to weld on a take off for the DV re route that the K04 cars have..

Like this one

[gillm]

a fatter IC > TB pipe defo helps...i tested the SFS one and it gave 10bhp extra on a K03.

damit 10bhp . you never told me this

[jonnyc]

Neuspeed Hi-Flow Intercooler Pipe

http://www.awesome-gti.co.uk/product.php?xProd=6766&xSec=360

Does the above fit the Ko4 Tfsi cars

It will fit but you will have to weld on a take off for the DV re route that the K04 cars have..

Like this one

Exactly, in fact that looks like a pretty standard piece, unless its just been powder coated after being modified.. Could be worth sending Neuspeed an email to ask about a K04 fitment pipe?

[Tfsi_Mike]

so there are 2 pipes available (2 separate pipes on the same engine) from neuspeed for the Ko4 Tfsi?

[yin]

http://www.neuspeed.com/products/product_details.asp?app=95|GV&type=11&ltype=ns_euro&p_id=2046

can't get the above link to work without copy and paste

But this is the other pipe