Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers  (Read 4758 times)

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers
« on: October 11, 2014, 08:14:09 pm »
Going to be replacing the plastic inlet manifold on my 2.0 TDI 170 for a alloy manifold off a BKD 2.0 140 and need a couple of part numbers :)

Manifold - Any changes in the different iterations of 03G129713 i should be aware of?
Gasket - 03G129717 (for alloy head)
Bolts - Can i reuse the existing bolts?
Logged
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2775
Re: Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers
« Reply #1 on: October 11, 2014, 08:46:17 pm »
From 2006 the gasket and manifold are different as they have suffix letters

Manifold requires AF

Gasket requires  D

As for the bolts ok to reuse torque valve 20 NM
Logged

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Re: Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers
« Reply #2 on: October 11, 2014, 08:53:20 pm »
Hi John,

Mine is a 2007, i'll look out for a /AF manifold on ebay  :happy2:
Logged
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2775
Re: Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers
« Reply #3 on: October 11, 2014, 08:58:08 pm »
Logged

Offline Whitt_tdi

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 88
Re: Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers
« Reply #4 on: October 12, 2014, 09:47:06 am »
Iv got a 170 tdi and mines got the alloy inlet on it already?
Logged

Offline marko

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 16
  • -Receive: 33
  • Posts: 903
    • Email
Re: Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers
« Reply #5 on: October 12, 2014, 01:21:44 pm »
Whats the purpose of the changeover??
Logged
2007 TR gt170...heated leather,underseat drawers,auto-levelling bi-xenons,puddle leds,chrome switches,footwell lights f+r,cruise control and ed30 rear lamps,LED interior....carbon highline clocks,ed30 front spoiler,RNS 510 P+MDI,mk6 gti gearknob,TPMS done,complete r32 trim kit+ MFSW,r32 f+r brakes,RLS fitted.headlamp washers,folding mirrors and boot pop,mk6 RVC,19"Helios,AP coilies,valeo LEDs  ...dpf delete and remap to finish off

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Re: Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers
« Reply #6 on: October 12, 2014, 05:23:22 pm »
The inlet flaps found in the plastic manifold found on the BMN engine unto 2008 (i believe) fail, the alloy manifold on the BKD fits the BMN and does not have flaps :)

Plus i need to clean my manifold. 
Logged
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!
Pages: [1]   Go Up
« previous next »