Feeler: group buy for new R32 310mm rear OEM BBK setups £399

[omeydz]

Hello everyone.

Iv done a handful of group buys on here including the Depo Xenon look lights if you dont remember!

Might have pieced together a group buy on 310mm rear setups consisting of the following from my suppliers when I used to do retrofits:

- New (not refurbs) TRW 310mm complete carriers and calipers in podwercoated R32 blue with 3yr guarantee
- 310mmx22mm New MTEC Rear vented rotors with these options (drilled / Drilled+grooved / grooved / Dimpled + grooved
- Brakepad fitting kit

Priced delivered ~ £399

If you want pads they can be priced up separately

Hoses and hardlines are transferred from your stock calipers (if you want new ones can price these up for you too)

Splash guards can be supplied if desired but not always fitted routinely due to amount of modification needed to get them to fit (4motion differ to 2wd rear hubs etc)

*NOTHING WILL GO AHEAD WITHOUT ADMIN APPROVAL* 

This is purely to gauge interest and if admins are happy and there is enough interest for this then I will sort things out to make it happen.

Please post below 

Cheers, Omar

[PaulED30]

This couldn't have came at a better time, if it goes ahead I'm after discs and pads 

[rich83]

Which company will be selling the parts?

[omeydz]

@PaulED30  - Great stuff! Im still finalising prices and MOQ etc so keep your eyes peeled 

@rich83  - I am getting them direct. Pads will also come from MTEC where possible.

[rich83]

Ok...

Just be aware that normal forum members cannot run GBs.

[omeydz]

Ok...

Just be aware that normal forum members cannot run GBs.

PM'd you Rich

[th3_f15t]

Suggestion - Possible to offer the rear calipers in other colours to attract more buys? I have some already, but I went for Audi S3 rears to match my black from brakes. Just a thought...

[omeydz]

Getting payment terms sorted with admin currently so green light should be given soon.

In the meantime please continue to post if you are interested in this group buy. Keep your eyes peeled for updates! 

@th3_f15t  - Thanks, Ill see if I can get more colours but the offer will be on blue. TRW does silver , black and blue iirc so shouldnt be an issue getting those too hopefully.

[omeydz]

UPDATE: Spoken with TRW and they can send out these calipers and carriers in RED (Cupra R), BLACK (S3) , SILVER (A3 3.2 v6) and BLUE (R32).

Here are pics I took yesterday of a sample purchase I did in R32 Blue and discs vented, dimpled and grooved. This is so you can get an idea of quality of what you will get which is simply excellent! (Mintex pads set are just for completeness ~£20 extra - fine for street/fast road use)

[vRSAlex]

I would only offer these with brand new hard pipes.  They are not cheap, but 80% of the hard pipes I try and swap over cant be swapped over.

Also worth doing them with normal 310mm discs if no one wants drilled/grooved.

[omeydz]

Thanks Alex!

Normal discs can be supplied without drilled holes, grooves or dimples at buyer's request.

Hardline part numbers are 1k0611763E and 1k0611764L. According to ETKA all rear hardlines are the same for 2wd and 4wd for all Golfs 2004-2012. Cannot confirm this personally but Alex does this work a lot. Of course any used parts must be checked and renewed if damaged, worn or faulty before doing this work.

[vRSAlex]

Thanks Alex!

Normal discs can be supplied without drilled holes, grooves or dimples at buyer's request.

Hardline part numbers are 1k0611763E and 1k0611764L. According to ETKA all rear hardlines are the same for 2wd and 4wd for all Golfs 2004-2012. Cannot confirm this personally but Alex does this work a lot. Of course any used parts must be checked and renewed if damaged, worn or faulty before doing this work.

Correct, the pipes are all the same.  They are expensive too!

[omeydz]

Any more peoples thoughts on this GB?

[grey golfster]

I'm interested.
Red set please, pads too.

Can some one please point me in the direction of info on the "hard line" issue? Must they come only from vw?
How much exactly is "expensive"?
Thanks

[rich83]

@omeydz how many sets required for GB... have you sorted out payment terms with them yet?