Make a donation

Author Topic: benchtest rcd310  (Read 1986 times)

Offline reaper7881

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 4
  • Posts: 210
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,68492
benchtest rcd310
« on: October 27, 2014, 05:14:01 pm »
hi

does anyone know how to bench test a headunit,
more specifically what pins need powering and ground

 :smiley:

like this guy has done
54 MK5 Golf 1.9tdi 3dr SMD Full Interior and Speedo Conversion, GTi Highline , Flat Bottom Wheel, ED30 Rear lights

Offline jason_rmh

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 69
  • -Receive: 81
  • Posts: 911
Re: benchtest rcd310
« Reply #1 on: October 27, 2014, 05:41:12 pm »
I guess you will need a spare wiring connector for the rear of the head unit, then run the relevant power wires to a battery or ideally a bench power supply.

Jas

VCDS (Preston, Lancashire)

Offline skard

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 5
  • -Receive: 245
  • Posts: 2674
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,62636
Re: benchtest rcd310
« Reply #2 on: October 27, 2014, 06:07:18 pm »
Pins marked +UB and Code need 12v. Earth, needs an earth.



Used to have Edition 30 - number 009 and a GT TDI 140.
Now have an S4 B8 Avant (stage 2)

Offline DanMaytee

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 13
  • Posts: 189
    • Email
Re: benchtest rcd310
« Reply #3 on: October 27, 2014, 06:23:43 pm »
I've always used an old PC power supply :).  Actually used one as a stereo in the home for quite a while! :)

Offline reaper7881

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 4
  • Posts: 210
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,68492
Re: benchtest rcd310
« Reply #4 on: October 28, 2014, 12:19:52 pm »
Sorted


Thanks
54 MK5 Golf 1.9tdi 3dr SMD Full Interior and Speedo Conversion, GTi Highline , Flat Bottom Wheel, ED30 Rear lights