Make a donation

Author Topic: I've rock hard breaks after stalling.  (Read 1246 times)

Sandy

  • Guest
I've rock hard breaks after stalling.
« on: September 17, 2016, 02:28:18 pm »
I stalled the car some weeks ago and re-started it and as I was pulling into the space the breaks were rock hard and I needed to use the handbreak to come to a stand still... today I stalled reversing off my drive and started her up again and when I go to the first junction I could not stop in time and had to use handbreak... I pumped a few times, tunrned her off and decided to turn around.

I have read that this could be a vacum hose... is this a VAG job or an easy fix via utube?  I have precious cargo being a mum of two but also going through a tough time at the mo.   Thoughts please.  Thanks in advance.

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 685
  • Posts: 8338
Re: I've rock hard breaks after stalling.
« Reply #1 on: September 19, 2016, 03:07:57 pm »
Definitely a hose from the vacuum pump has come off or split.  Not necessarily a dealer job.  Any garage should be able to trace the hose back to the servo and figure it out.


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D