Make a donation

Author Topic: Car in for Milltek and other things ;)  (Read 23505 times)

Phil Mcavity

  • Guest
Re: Car in for Milltek and other things ;)
« Reply #60 on: December 24, 2008, 11:57:48 am »
Agree with illyan, robins car has been turned down because running it on the old settings, he damaged a turbo, so it was lowered to give a better operating tolerance.

An intercooler cannot give Higher horsepower joe, a larger intercooler just allows better heat dispersion as the engine and turbo will run hotter because it receiving more fuel/air mix, so all it does is help the engine temperature to run at its correct running temperature with any other adverse effect ie cracking turbo's etc as an example(in robins case).It has no affect on improving horsepower.If you add a full exhaust joe, then yes your car will produce towards your figure that youve been given.Golfgirls car produced 260bhp as stock on a set of rollers , then went on a dyno dynamics and got stock bhp 227bhp.
Its just the accuracy of the rollers that give these differences and nether robins or chris's cars are not sick!.

Like ive said before, we need everyone on a SAME set of rollers to proove this once and for all.  :smiley:

« Last Edit: December 24, 2008, 12:03:27 pm by Phil Mcavity »

Offline WhiteGTI

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 22
  • Posts: 3222
  • F-A-S-T
Re: Car in for Milltek and other things ;)
« Reply #61 on: December 24, 2008, 12:04:09 pm »
Why won't mr T_T come back and help us out!

I've noticed that he has recently been on other VAG forums!

Maybe he doesn't like us anymore!
2008 Golf GTI - Revo Stage 2 NOW SOLD

2006 E46 BMW M3 - 343hp
2000 Lotus Elise Sport160 - 160hp

Phil Mcavity

  • Guest
Re: Car in for Milltek and other things ;)
« Reply #62 on: December 24, 2008, 12:06:53 pm »
 :mad:, i dont think he agree's with some peoples opinions on the GTi forums. If his word isnt final, then all hell breaks loose, and is not good for forum morale. He has upset a number of people with his sometime stern wordings on some subjects.

Tis a shame as he has in no doubt alot of knowledge.

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Car in for Milltek and other things ;)
« Reply #63 on: December 24, 2008, 01:51:48 pm »
^^^^

T_T certainly has a wealth of knowledge and contributes a lot to any VAG forum. However - His word is not gospel and he isn't right about everything he posts (and neither am I or any of us - we can only post info which is to the best of our knowledge). The issue I sometimes (not always!) have with T_T is that he sometimes slags off a company - Superchips and JKM being two examples. I tend to slag off Regal and we are all entitled to our opinions, but as Hurdy has often said: Listen to everybody and make up your own mind.

No-one is trying to claim that JKM's dyno is the one and only set of rollers in the UK which is truthful or operated properly, but I know that I can trust JKM and I view a dyno as primarily a diagnostic tool.


« Last Edit: December 24, 2008, 03:35:58 pm by RedRobin »


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline WhiteGTI

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 29
  • -Receive: 22
  • Posts: 3222
  • F-A-S-T
Re: Car in for Milltek and other things ;)
« Reply #64 on: December 24, 2008, 03:08:39 pm »
Thats a great photo!!!!!!!!!!!!!

I wish I had taken a similar one for when my car was on there!!!!!
2008 Golf GTI - Revo Stage 2 NOW SOLD

2006 E46 BMW M3 - 343hp
2000 Lotus Elise Sport160 - 160hp

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Car in for Milltek and other things ;)
« Reply #65 on: December 24, 2008, 03:34:06 pm »
^^^^

Thanks for the compliment, Chris :smiley: - It was just a quick pic I grabbed and I didn't stay around in that position because I may have got in Keith's way.

Of course, it's having AP Racing brakes which makes that pic :wink: :evilgrin:


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Car in for Milltek and other things ;)
« Reply #66 on: December 24, 2008, 07:24:40 pm »


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Phil Mcavity

  • Guest
Re: Car in for Milltek and other things ;)
« Reply #67 on: December 24, 2008, 08:19:09 pm »
As you can tell my son is trying to tell me something :wink:


Offline CocoPops

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 3
  • -Receive: 11
  • Posts: 596
    • Kennet Heath
    • Email
Re: Car in for Milltek and other things ;)
« Reply #68 on: December 24, 2008, 08:22:29 pm »
£390 ;)

Stage 2 ;)

Kate will do you a deal I'm sure ;)

Need I say more ;)


Used to Own: 2008 GTI Ed30 | ITG Intake | Miltek TBE System | Bluefin Stage 2 | 327bhp
On Order: 2017 Golf GTI Performance Pack 5dr DSG
Also own: 2016 Lotus Evora 400

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Car in for Milltek and other things ;)
« Reply #69 on: December 24, 2008, 08:33:52 pm »
^^^^

@Phil :signLOL: :signLOL: :signLOL: - That's brilliant!

Sounds as if the worm is in the brain!


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: Car in for Milltek and other things ;)
« Reply #70 on: December 25, 2008, 12:08:43 am »
Questions were asked on Friday and the deal was offered so the seeds have been firmly planted.  :innocent:
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline illyun

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 857
Re: Car in for Milltek and other things ;)
« Reply #71 on: December 25, 2008, 01:42:43 am »
so what people are saying is all tuners talk sh1t and JKM rollers are gospal so all tuners should take their cars there to prove they are getting what they say

Not at all.  It just that its easy for a tuner to get a higher peak bhp reading at the expense of say, a decent consistant curve.

Offline illyun

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 857
Re: Car in for Milltek and other things ;)
« Reply #72 on: December 25, 2008, 01:47:51 am »
^^^^

T_T certainly has a wealth of knowledge and contributes a lot to any VAG forum. However - His word is not gospel and he isn't right about everything he posts

True, speaking to Keith at JKM, I asked about the Ed30 engine and the S3 engine and as far as he is concerned, they share the same engine parts according to the ETKA part numbers... so he thinks that the Ed30 engine indeed is the same as the S3 one with a few minor differences.  This is in agreement with what Superchips say and articles in VW Driver. TT however thinks they don't and that the Ed30 engine is the same as the GTI engine, but for once I really wasn't convinced by his reasoning.  Or maybe thats because I have an Ed30  :evilgrin: :evilgrin: :evilgrin:

Offline illyun

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 857
Re: Car in for Milltek and other things ;)
« Reply #73 on: December 25, 2008, 01:48:53 am »
^^^^



No-one is trying to claim that JKM's dyno is the one and only set of rollers in the UK which is truthful or operated properly, but I know that I can trust JKM and I view a dyno as primarily a diagnostic tool.



You hit the nail on the head there.  Thats exactly what I meant.  8)

Offline illyun

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 857
Re: Car in for Milltek and other things ;)
« Reply #74 on: December 25, 2008, 01:50:09 am »
As you can tell my son is trying to tell me something :wink:



I really feel that you should grant his wish  :evilgrin: