Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Pls help - Rear light clusters wire colours  (Read 11570 times)

Offline nc35

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 40
  • -Receive: 14
  • Posts: 702
Pls help - Rear light clusters wire colours
« on: November 26, 2009, 09:59:55 am »
Hi All

I hope to fit a 7 way to relay today.  Tried yesterday and gave up

As I can tell...

Rear LH as you look at the car from the back:

Indicator - BLACK/WHITE
Tail - GREY/BLACK
Brake & Tail - BLACK/RED

Rear RH

Indicator - BLACK/GREEN
Tail - BLACK/PURPLE
Brake & Tail - GREY/GREEN

Reverse - BLACK/BLUE

Is there anywhere in the boot I can get a switched live for the relay?  Don't really want it on all the time from the 12v Acc Socket?

Also is there any way to check these with a multimeter.  I assumed yesterday that the CANBUS system prevents this.
Finally are the SCOTCH-LOCK connectors ok for this?

Thanking you all in anticipation.
Logged
No Golf anymore. 
Enjoyed the last five years of ownership of Mk5 & 6 GTIs.
Plus an excellent forum for knowledge and new ways to deplete the bank account.
Thank You Everyone.

Offline Top Cat

  • Top cat
  • Just look at my post count
  • ******
  • Thank You
  • -Given: 171
  • -Receive: 335
  • Posts: 8196
  • Almost Jacamo
Re: Pls help - Rear light clusters wire colours
« Reply #1 on: November 26, 2009, 11:42:39 pm »
  Anyone able to help this guy out.  :happy2:
Logged

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: Pls help - Rear light clusters wire colours
« Reply #2 on: November 27, 2009, 09:24:48 am »
....

I don't have a clue about such things, so all I can do to help is to 'bump' this thread..



^ Isn't she lovely? ^
« Last Edit: November 27, 2009, 09:26:27 am by RedRobin »
Logged


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline VC

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 80
  • -Receive: 93
  • Posts: 4359
    • Very Cherry Stickers and Decals
Re: Pls help - Rear light clusters wire colours
« Reply #3 on: November 27, 2009, 09:31:31 am »
i do know that others recommend solder and heatshrink in that area mate rather than scotchlocking due to the slamming of the boot and the effect over time on the gripped connection in the block  :happy2:

for the wiring, i cant help though...used to have a CD with all that info on  :sad1:
Logged

Offline SteveP

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 117
  • -Receive: 340
  • Posts: 6005
    • My Project
Re: Pls help - Rear light clusters wire colours
« Reply #4 on: November 27, 2009, 11:56:03 am »
As the small fruit man says solderd wires with proper heat shrink is the way to go.

As for a switched live why not take a feed off the back of the 12v accessorie socket in the boot  :happy2:
Logged

Offline nc35

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 40
  • -Receive: 14
  • Posts: 702
Re: Pls help - Rear light clusters wire colours
« Reply #5 on: November 29, 2009, 09:53:45 am »
Thank you all for your help and effort.

I can confirm that the wire colours are correct. Anyone thinking of doing similar, the best place for all the wires and an earthing point is the NSR wheel arch.

Dead chuffed now got a removable tow bar with electrics for towing small trailer and a reversing camera.

Thanks again

Lee
Logged
No Golf anymore. 
Enjoyed the last five years of ownership of Mk5 & 6 GTIs.
Plus an excellent forum for knowledge and new ways to deplete the bank account.
Thank You Everyone.
Pages: [1]   Go Up
« previous next »