Hi all
I bought one of these to replace the OEM unit (without a MFSW.) I wanted bluetooth connectivity and streaming. Saw the spec on the SPH-DA120 and was drawn in by the Apple maps function as well as the promise of more CarPlay apps coming online.
I bought from Halfords, with the usual confidence-sapping experience of dealing with their "specialists." They had said they'd have the facia adaptor in stock but when I turned up, naturally they didn't.
They supplied the wiring harness adapter plugs and the adapter for the fakra antenna connection.
A quick test-fit established:
The fakra connection adapter was the wrong type (single instead of double & with a shallow L-shaped connection for the head unit instead of the regular, deeper male connector.
The wiring harness fits and connects power and speakers but when the ignition is turned off, the head unit doesn't power-down. There appears to be no way to turn it off on the unit itself either.
The body of the Pioneer isn't large enough to secure firmly in the aperture left by the larger OEM unit and it seems it would bounce about in there. I noticed there are locating tabs in the rear of the OEM unit which slot into the rear of the frame of the aperture.
On the plus side, the sound is good and the interface for music and naps seems as good as I hoped.
Does anyone know of any kit or adapter to make the unit sit more snuggly, hopefully even using the aperture slots to locate in? I've seen quite a few kits and parts online but bone seem to address this issue apart from what looks like some foam blocks which I'm guessing would be used to pad it out a bit.
Also, most importantly, is there a definitive view on how to address the constant live power issue? I've seen references to OpCom and yellow and red wires being switched bit I'm confused by it.
Any help would be appreciated.
Thanks
Dunk