Make a donation

Author Topic: Help needed, LEDs  (Read 1533 times)

Offline AndrewWillis

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 5
  • Posts: 81
    • Email
Help needed, LEDs
« on: March 16, 2015, 07:01:55 pm »
I was swapping out my yellow sidelights on my projector headlights, and the new LED dropped into the light housing, how the hell do I get it out again???
05, 3door Red GTI DSG, BCS Powervalve 200 Cell, DNX525DAB, Xenons, R-Tech 2+

Offline hugh

  • Can't Read PM's Yet!
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 5
Re: Help needed, LEDs
« Reply #1 on: March 16, 2015, 09:02:39 pm »
unlucky :( would say the headlight would need to be removed then with a good bit of luck turned up side down and shaken out. Good luck :)

Offline K9

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 1
  • -Receive: 14
  • Posts: 1076
  • VW LifeStyle
    • Email
Re: Help needed, LEDs
« Reply #2 on: March 16, 2015, 09:39:55 pm »
remove bumper and remove the headlight and try to wiggle it out  :happy2:

Offline AndrewWillis

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 5
  • Posts: 81
    • Email
Re: Help needed, LEDs
« Reply #3 on: March 17, 2015, 06:05:21 pm »
I have good news, the bulb is out! Hurrah!
Luckily the headlights are awaiting installation, I was just putting fresh bulbs in beforehand! All I did was wiggled the headlight until the bulb was visible when looking head on...


Grabbed the little bugger with some Biopsy Forceps...


And pulled it out!


They are incredibly handy tools to have lying around!

05, 3door Red GTI DSG, BCS Powervalve 200 Cell, DNX525DAB, Xenons, R-Tech 2+

Offline MC71

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 413
  • -Receive: 427
  • Posts: 5198
  • Mk7 R
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,113185.0.html
Re: Help needed, LEDs
« Reply #4 on: March 17, 2015, 06:10:37 pm »
^^^^ I so want that tool! Looks Uber useful. Off to hunt eBay......
.                              

                    Build thread Stage 2+ Edition 30 ~~Clicky here~~

Offline AndrewWillis

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 5
  • Posts: 81
    • Email
Re: Help needed, LEDs
« Reply #5 on: March 17, 2015, 06:19:57 pm »
I was lucky enough to grab this one when we were having a clear out at work! It's really good when it comes to wiring! They can be priced anywhere between £10 and £500, depending on the brand and age...
« Last Edit: March 17, 2015, 06:21:51 pm by AndrewWillis »
05, 3door Red GTI DSG, BCS Powervalve 200 Cell, DNX525DAB, Xenons, R-Tech 2+

Offline bennyx_o

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 5
  • Posts: 78
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,91047.0.html
Re: Help needed, LEDs
« Reply #6 on: March 17, 2015, 07:05:15 pm »
Embarrassingly enough this happened me too. Have LEDs on the Lupo that are quite bright and white so I put them in the Golf. They were a slight bit smaller than the hole and weren't canbus, and when taking them out they both fell in!

Offline AndrewWillis

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 5
  • Posts: 81
    • Email
Re: Help needed, LEDs
« Reply #7 on: March 17, 2015, 07:12:44 pm »
That's exactly what happened to me! It is such a terrible design. I'll have to start a search for a smaller pair!
05, 3door Red GTI DSG, BCS Powervalve 200 Cell, DNX525DAB, Xenons, R-Tech 2+