RNS510, mfsw and highline coding issues.......

[mk4gti-t]

I've recently fitted an RNS510 but can't get the track up and down buttons working correctly 

When I change the code in the navigation module to get them to work it stops the mfd displaying the compass direction in the top left hand corner of the screen.

Also I can't scroll through audio, set up, navigation menus etc even with the stalk buttons?

Any ideas as to what the coding should be?

My car is a 2005 gti dsg and I've fitted highline dash, old style mfsw with paddles and RNS510. I've also swapped the steering wheel controler to the 'ch' type.

Strangely though when I had a newer type mfsw without paddles all worked fine???

[skard]

Unticked BAP in the coding for stereo?

[mk4gti-t]

Yea the compass comes back but the track up/down buttons stop working then.....

[skard]

Did you have a GPS compass module before the RNS510?

[mk4gti-t]

I used to have an mfd2 and got the gps antenna off eBay. It all worked fine then.

[skard]

The GPS compass module is seperate to the stereo. Probably rare for a mk5 to have it but if you do, it can interfere with the RNS510 until you deactivate/unplug it.

Post up a scan.

You probably have a later cluster that is intended for use with the newer MFSW buttons.

[mk4gti-t]

No can't find a compass module installed anywhere. My cluster part number is 1K6 920 972 D not sure how old or new that is though?

[skard]

That cluster is the new button generation but should work ok.

Have you got a scan to post up?

[mk4gti-t]

No sorry need to get it to my mates to get a scan. What should I be looking for to post on here? Thanks for the help by the way 

[olsen-72]

My buttons didnt work properly until i changed wiper stalk for the one without buttons.

[mk4gti-t]

How did you get to the menus on the display then? I have no menu button on the old style steering wheel.....

[olsen-72]

Well.. I have mk6 steering wheel mate

[mk4gti-t]

Oh I see......