Author Topic: RNS 510 light sensor (Read 1479 times)

Rukz · « **on:** March 21, 2015, 08:32:09 pm »

Good evening all,

Is there anyway to deactivate the light sensor (located on the top right corner) on the RNS 510?

I want the manual brightness settings chosen in the set up menu to take full and final priority without the light sensor overriding and dimming the screen.

Thanks in advance

Rukz · « **Reply #1 on:** March 23, 2015, 08:29:30 pm »

Anyone ??

Rukz · « **Reply #2 on:** March 26, 2015, 07:04:05 pm »

Guess not

Golf_GT_TDI · « **Reply #3 on:** March 26, 2015, 07:27:27 pm »

If you fancy taking it apart you could do it, I have no idea if it could be done via custom firmware

Rukz · « **Reply #4 on:** March 26, 2015, 07:45:24 pm »

Opening it up.... Well ideally no I wouldn't want to do that. Nonetheless, how would I do it if that's the only route to go down? Cheers

Golf_GT_TDI · « **Reply #5 on:** March 28, 2015, 03:38:35 am »

I guess it's just using a LDR so desoldering and placing a 5k resistor there should do it?

Rukz · « **Reply #6 on:** March 28, 2015, 04:53:41 pm »

Sounds like a good idea... However, it also sounds just a bit too scary for me

definitely not something I'll be able to do

Author Topic: RNS 510 light sensor (Read 1479 times)

Rukz

RNS 510 light sensor

Rukz

Re: RNS 510 light sensor

Rukz

Re: RNS 510 light sensor

Golf_GT_TDI

Re: RNS 510 light sensor

Rukz

Re: RNS 510 light sensor

Golf_GT_TDI

Re: RNS 510 light sensor

Rukz

Re: RNS 510 light sensor