Make a donation

Author Topic: k03 maf output  (Read 5713 times)

Offline Janner_Sy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 113
  • Posts: 5392
k03 maf output
« on: November 30, 2009, 09:51:27 pm »
whats the going rate for the maf reading on a k03.

my peak MAF was 193g/s iirc which using the old divide by 0.8 would equal 241bhp, which id throw a wild one out and say i have a fair bit more than. thinkive read somewhere that stgage 2+gti's put out between 190-205g/s.

I know you have to take it witha pinch of salt due to it not taking into account the timing etc.


Offline Poppa Dom

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 40
  • Posts: 1553
Re: k03 maf output
« Reply #1 on: November 30, 2009, 10:00:04 pm »
A stage 2 K03 based gti runs at approximately 240bhp IIRC

Offline Hedge

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 484
  • -Receive: 304
  • Posts: 6621
Re: k03 maf output
« Reply #2 on: November 30, 2009, 10:03:26 pm »
A stage 2 K03 based gti runs at approximately 240bhp IIRC

So there you go Sy. Can you still reload the Bluefin or is it too late?  :P

Offline Janner_Sy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 113
  • Posts: 5392
Re: k03 maf output
« Reply #3 on: November 30, 2009, 10:13:37 pm »
A stage 2 K03 based gti runs at approximately 240bhp IIRC

260bhp stage 2 normally seen a couple do it on jkm's

Offline Janner_Sy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 113
  • Posts: 5392
Re: k03 maf output
« Reply #4 on: November 30, 2009, 10:14:10 pm »
A stage 2 K03 based gti runs at approximately 240bhp IIRC

So there you go Sy. Can you still reload the Bluefin or is it too late?  :P

lol, revo next

Offline Poppa Dom

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 40
  • Posts: 1553
Re: k03 maf output
« Reply #5 on: November 30, 2009, 10:17:55 pm »
A stage 2 K03 based gti runs at approximately 240bhp IIRC

260bhp stage 2 normally seen a couple do it on jkm's
Really, I'd be surprised at that, Stage 2 K03's consistently make 240-244 on JKM's dyno.

Offline Hedge

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 484
  • -Receive: 304
  • Posts: 6621
Re: k03 maf output
« Reply #6 on: November 30, 2009, 10:26:25 pm »
Infairness I was there when Makefish's Stage 2 Octy made 285hp and 350lbft on a K03. It was later found to operating outside the parameters of the map and was toned down to become the Revo Stage 2+ development car which ended up around 280hp and 315lbft if I remember correctly.

Offline chungster

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 6
  • -Receive: 33
  • Posts: 1963
Re: k03 maf output
« Reply #7 on: November 30, 2009, 10:28:52 pm »
RR's k03 Gti is an excellent case in point. But if u go further north u can find k03 Gti's doing 270bhp maybe. One even did 300bhp alledgedly. Once upon a time dangb's leon pre bt made 290bhp but even he had to laugh at that!  

Offline Hedge

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 484
  • -Receive: 304
  • Posts: 6621
Re: k03 maf output
« Reply #8 on: November 30, 2009, 10:34:21 pm »
Sorry I forgot to say that was at JKM and did involve Jim having to restrap it.  :surprised:



Enjoy.  :evilgrin:

Offline Janner_Sy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 113
  • Posts: 5392
Re: k03 maf output
« Reply #9 on: November 30, 2009, 10:35:55 pm »
revo stage 2



stage 2 sharkperformance


revo stage 2+




all of these on JKMs rollers. two of them this as well.

mine made 277 and 286 on AMDs rollers, while i very much doubt that personally especially with the issues i had, i doubt they were 40bhp out. i reckon she was aound the 250bhp area then
« Last Edit: November 30, 2009, 10:39:02 pm by vRSy »

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: k03 maf output
« Reply #10 on: November 30, 2009, 10:46:27 pm »

A stage 2 K03 based gti runs at approximately 240bhp IIRC


260bhp stage 2 normally seen a couple do it on jkm's


Really, I'd be surprised at that, Stage 2 K03's consistently make 240-244 on JKM's dyno.


....Extremely consistently in my case - Whatever the time of year and over a period of nearly 2 years.

Further backed up by a 245 bhp plot this weekend on SurreyRR Dyno-Dynamics.


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline Janner_Sy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 113
  • Posts: 5392
Re: k03 maf output
« Reply #11 on: November 30, 2009, 10:47:01 pm »
RR's k03 Gti is an excellent case in point. But if u go further north u can find k03 Gti's doing 270bhp maybe. One even did 300bhp alledgedly. Once upon a time dangb's leon pre bt made 290bhp but even he had to laugh at that!  

i agree that some RRs show huge figures but its also been shown that different DD rollers give very similar results when compared to each other.

it also worth noting that RRs gti is minus an intake, and id bet hes going to get a fair whack more out of it once his twintake is fitted.

back on subject, has anybody know of any MAF readings for a k03, any stage??

hedge did you ever log yours, (think i might have got your graph up as well, hope you dont mind)

Offline Hedge

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 484
  • -Receive: 304
  • Posts: 6621
Re: k03 maf output
« Reply #12 on: November 30, 2009, 10:49:16 pm »
hedge did you ever log yours, (think i might have got your graph up as well, hope you dont mind)

Which one Octy? Or Golf?

Offline Janner_Sy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 113
  • Posts: 5392
Re: k03 maf output
« Reply #13 on: November 30, 2009, 10:50:02 pm »
RRs is the only one i have seen reading below 250bhp on stage 2, but i bet that is due to the ones i have seen have all had intakes. Id bet his is putting out a similar output as the stage 2 dynos i posted above.

@hedge was your octy, got it from the vRS on the dyno thread on brisky

Offline Hedge

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 484
  • -Receive: 304
  • Posts: 6621
Re: k03 maf output
« Reply #14 on: November 30, 2009, 10:55:35 pm »
@hedge was your octy, got it from the vRS on the dyno thread on brisky

Sure? I only ran mine once on stage 1 and got quite low figures.  :confused: