Make a donation

Author Topic: How easy is its to change the rear discs and pads on an Edition 30  (Read 1159 times)

Offline Bish155

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 2
  • Posts: 66
    • Email
As the the title reads, I have an edition 30 that needs the rear pads and discs changing. How easy is this to do? Thanks
Edition 30, Helix Clutch, pipercross panel filter, pipewerx Downpipe & Sports cat (200 CEL), R-Tech stage 1.5 linear map:314bhp & 321 Ib/ft, Audi S3 front brakes, H&R springs

Offline Bane

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 5
  • Posts: 187
  • "I was born a handsome man and now I'm half a goat
Re: How easy is its to change the rear discs and pads on an Edition 30
« Reply #1 on: April 06, 2015, 08:52:01 pm »
Fairly straightforward as long as you have a caliper wind back tool.

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2775
Re: How easy is its to change the rear discs and pads on an Edition 30
« Reply #2 on: April 06, 2015, 09:02:11 pm »
As above said but read these comments here http://forums.vwvortex.com/showthread.php?4469604-MKV-Rear-Brake-Caliper-Carrier-Bolts-Question
because you'll need to remove the carrier bolts and you can hit problems without the correct tooling and vehicle high enough for a breaker bar for the tripple square bolts.

YouTube has videos on the subject to
https://m.youtube.com/watch?v=wt8v4lVZGL0

Offline Bish155

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 2
  • Posts: 66
    • Email
Re: How easy is its to change the rear discs and pads on an Edition 30
« Reply #3 on: April 06, 2015, 10:25:22 pm »
Appreciate the reply guys
Edition 30, Helix Clutch, pipercross panel filter, pipewerx Downpipe & Sports cat (200 CEL), R-Tech stage 1.5 linear map:314bhp & 321 Ib/ft, Audi S3 front brakes, H&R springs