Make a donation

Author Topic: Exhaust back box swap  (Read 1404 times)

Offline D_Philli_82

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 2
  • Posts: 144
    • Email
Exhaust back box swap
« on: April 27, 2015, 09:41:45 am »
Hi,

Can't find any how to's for changing a standard back box... I have a 1.9tdi - going to put a 2.0tdi one on (straight pipes) and put some better tips on...got the back box cheap - not looking at muffler delete as I still have the cat and hate the whooshing sound that comes when the cat's still on..so purely cosmetic..

As I understand it's a straight swap but just need to know what's involved and if there's anything I should be aware of when swapping..

Thanks in advance


MK5 1.9TDI 150Bhp

Offline omeydz

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 3
  • -Receive: 50
  • Posts: 914
Re: Exhaust back box swap
« Reply #1 on: April 30, 2015, 08:36:05 am »
Higher you can get the car.. the better you can see what you are doing.

That said the backbox is held up by a rubber bush hanger on the passenger side and on drivers side its a rubber with metal bracket with 3 screws. Easier to remove whole bracket to get it off in my exprience.

Lastly may be different diameter pipework present on your 2.0tdi box so get out your measuring tape and might need a reducer sleeve and clamp set.

Good luck! :)
Recently back on the forum! Good to be back
Current Rides
Mazda RX8 231bhp ( very different little rocket lol!)
----
SOLD
2011 Golf MK6 1.4 TFSI R20/GTI Hybrid - DSG converted *world first!*
2007 MK5 Golf 1.4 FSI
2007 Golf MK5 GTI DSG
2008 Audi A5 3.0TDI