Make a donation

Author Topic: TPMS tyre pressure wiring help  (Read 2420 times)

Offline RetroRaz

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 194
  • Posts: 2821
    • Email
TPMS tyre pressure wiring help
« on: April 27, 2015, 07:39:48 pm »
Hi all.

I bought a tpms kit and not sure what some of the wires are for or where they go. Can someone help?

I know this one goes to the abs pump as it's the longest wire




Not sure what these 3 wires are for




And then this black connector comes off

Offline Degudodger

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 53
  • -Receive: 86
  • Posts: 1547
    • Flickr
Re: TPMS tyre pressure wiring help
« Reply #1 on: April 27, 2015, 08:59:30 pm »
2016 Mk7 Golf GTD - Reflex Silver with stuff.

VCDS Hex+Can - Will code for beer!

Offline RetroRaz

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 194
  • Posts: 2821
    • Email
Re: TPMS tyre pressure wiring help
« Reply #2 on: April 28, 2015, 02:11:53 pm »
 aah so remove 3 wires from the ABS plug and connect into the black connector and then the 3 remaining wires on the TPMS loom go back into the abs pump. As if its going in a loop?

Offline omeydz

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 3
  • -Receive: 50
  • Posts: 914
Re: TPMS tyre pressure wiring help
« Reply #3 on: April 30, 2015, 08:30:55 am »
Yep its a loop Raz.

This indirect tpms monitors abs sensors for rotational speed differences which result from a tyre loosing pressure. Not as accurate as direct sensor method but well worth it otherwise :)
Recently back on the forum! Good to be back
Current Rides
Mazda RX8 231bhp ( very different little rocket lol!)
----
SOLD
2011 Golf MK6 1.4 TFSI R20/GTI Hybrid - DSG converted *world first!*
2007 MK5 Golf 1.4 FSI
2007 Golf MK5 GTI DSG
2008 Audi A5 3.0TDI

Offline RetroRaz

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 194
  • Posts: 2821
    • Email
Re: TPMS tyre pressure wiring help
« Reply #4 on: April 30, 2015, 08:40:09 am »
Yep its a loop Raz.

This indirect tpms monitors abs sensors for rotational speed differences which result from a tyre loosing pressure. Not as accurate as direct sensor method but well worth it otherwise :)

nice one omar. I will give this a try next week some time :)