Make a donation

Author Topic: Engine running in...  (Read 4571 times)

Offline Horatio

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 39
  • Posts: 733
Engine running in...
« on: June 25, 2015, 09:46:22 pm »
 :driver:
Whats people thoughts....hard or soft? Seems to be a can of worms.
2007 Black Magic DSG Golf GTI Edition 30. No.1231
.:R32 "milk and juice come in 2 litres"
I run a dirty campervan, need scrubbers

dansmith180

  • Guest
Re: Engine running in...
« Reply #1 on: June 26, 2015, 01:04:01 pm »
I've always thought you were supposed to drive it carefully (not above 3000ish rpm) for the first 1000 miles, then do an oil change and use it properly from then on. A customer who came in with a brand new 991 GT3 said he wasn't supposed to go above 5000rpm for the first 2000 miles.

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php?PHPSESSID=vnv57irvlcmkjvkv4uveanfvvj&/topic,19740.0.html
Re: Engine running in...
« Reply #2 on: June 26, 2015, 02:49:39 pm »
Once warm. Full boost keep revs below 4K for a bit. Then twat it. Engine running in isn't that critical.... IMO

Offline GrayMK5GTI

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 125
  • -Receive: 248
  • Posts: 4165
Re: Engine running in...
« Reply #3 on: June 28, 2015, 01:02:24 pm »
From what I've read on R forum, most people just thrash it from day one (once oil is warm). Everyone following this rule has had little to no oil consumed  :happy2:
NOW: 2015 Golf R DSG 5 Door, Lapiz Blue, 19s, Discover Nav, Reversing Camera
GONE:2007 Black GTI Edition 30 3dr

Offline GTIEagles

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 10
  • -Receive: 22
  • Posts: 582
    • Email
Re: Engine running in...
« Reply #4 on: July 23, 2015, 02:55:39 pm »
I too have heard this method is best for reducing long term oil consumption. It helps settle the piston rings into the cylinder wall.