alright mate
just got a few probs hoping you can help me out with
fitted the newer climatronic to my car mkv r32 dsg 58 plate
fitting wasnt a problem, took out pin 16, chopped pin 20 in half and soldered pin 16 to pin 20
display worked striaght away, im pretty sure that the ac is working cos i get cold air when tested and i could hear the engine not change slighty when the ac button was pressed
i did a scan and brought up these faults, before the swap i had 0 faults so all these are new
Address 08: Auto HVAC (J255) Labels: 5K0-907-044.clb
Part No SW: 5K0 907 044 CF HW: 5K0 907 044 CF
Component: Climatronic 150 X173
Revision: 00000000
Coding: 0000001002
Shop #: WSC 05311 115 08193
ASAM Dataset: EV_Climatronic A01006
ROD: EV_Climatronic_VW36.rod
VCID: 71C71C4C11D5
1 Fault Found:
13701456 - Function Restricted due to Missing Message(s)
U1111 00 [009] - -
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 4
Reset counter: 105
Mileage: 14353 km
Date: 2000.00.00
Time: 15:32:33
Address 09: Cent. Elect. Labels: 3C0-937-049-30-H.lbl
Part No SW: 3C8 937 049 E HW: 3C8 937 049 E
Component: Bordnetz-SG H54 2602
Revision: 00H54000 Serial number: 00000008510155
Coding: E68F8F2700041500471400001400000000087B075C000100000000000000
Shop #: WSC 00000 785 00200
VCID: 334BD6442B49
Part No: 1K2 955 119 E
Component: Wischer 230508 021 0501
Coding: 00038805
Shop #: WSC 00000
Part No: 1K0 955 559 AH
Component: RLS 070608 054 0402
Coding: 00207789
Shop #: WSC 00000
1 Fault Found:
01320 - Control Module for Climatronic (J255)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 6
Fault Frequency: 2
Reset counter: 145
Mileage: 14353 km
Time Indication: 0
Freeze Frame:
OFF
Voltage: 12.20 V
OFF
ON
OFF
OFF
OFF
Address 19: CAN Gateway Labels: 1K0-907-530.lbl
Part No SW: 1K0 907 530 Q HW: 1K0 907 951
Component: J533 Gateway H07 0062
Revision: H07 01 Serial number: 280508F1000007
Coding: ED837F0E4002120003
Shop #: WSC 00248 210 93576
VCID: 354FE85C253D
3 Faults Found:
01320 - Control Module for Climatronic (J255)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00110100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 145
Mileage: 14353 km
Time Indication: 0
Date: 2000.00.00
Time: 14:04:03
01300 - Control Module for Navigation with CD-Rom (J401)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00110100
Fault Priority: 2
Fault Frequency: 2
Reset counter: 145
Mileage: 14353 km
Time Indication: 0
Date: 2000.00.00
Time: 13:42:51
01304 - Radio
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00110100
Fault Priority: 2
Fault Frequency: 2
Reset counter: 145
Mileage: 14353 km
Time Indication: 0
Date: 2000.00.00
Time: 13:42:51
-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 1K0-959-433-MAX.clb
Part No SW: 1K0 959 433 BT HW: 1K0 959 433 BT
Component: KSG PQ35 G2 020 0204
Revision: 00020000 Serial number: 00000000000000
Coding: 819002005103087F2D040C0C7008DFC6107F00
Shop #: WSC 00000 785 00200
VCID: 832BC684BB69
Part No: 1K0 951 605 D
Component: LIN BACKUP HORN H08 9001
Part No: 1K0 951 178 A
Component: Neigungssensor 003 0203
Part No: 1K0 951 178 A
Component: Innenraumueberw.003 0203
1 Fault Found:
01320 - Control Module for Climatronic (J255)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 4
Fault Frequency: 1
Reset counter: 145
Mileage: 14353 km
Time Indication: 0
Date: 2000.00.00
Time: 14:04:03
also i get these errors
Navigation -- Status: Sporadic communication error 1000
Radio -- Status: Sporadic communication error 1000
but when i go into these controllers it says no fault
i cant get them to clear from saying sporadic comunication error
also you know the buttons you have to hold down
ive done them but not sure if it makes any difference, the buttons keep on flashing, i do hope i make sense and you can help me out
thanks