7P6 035 730 K Bt module help

[rubbernut]

Hi i don't know if anyone can help me, i  got my 7P6 035 730 K module with plug and play wiring harness today, i have fitted last night on my mk6 2010 (60) gtd, I have a rdc310 in at the moment, but there is nothing showing on the radio or MFD is that because of the rcd310 or does it should like there is a problem, I know it needs coding but i expected some signs of life

Many thanks Matt

[Degudodger]

Think you need 7P6 Rev M for the mk6.

I tried Rev J in mine and had the same issues, in the end I swapped it for 5K0035730B, which works :)

[rubbernut]

Thanks for your reply the guy on eBay said it would be fine, so it's not just a coding thing

[Eddie-NL]

module is either faulty or the loom

contact the seller

[rubbernut]

module is either faulty or the loom

contact the seller

So i should have some use Eddie-nl

[Eddie-NL]

module is either not being powered up or is faulty.

as i don't know where you bought it or the type of loom used i can't narrow down what the issue is

[rubbernut]

module is either not being powered up or is faulty.

as i don't know where you bought it or the type of loom used i can't narrow down what the issue is

If I can get my money back do you sell them Eddie-nl

[Eddie-NL]

see if the module is getting power

[rubbernut]

see if the module is getting power

I will unplug it again tonight and see, the radio is getting power though the plug play harness

[rubbernut]

Ok Eddie-nl just been out to the car read somewhere about aux, put it on and SEAT_bt came on paired it and it works, but nothing on the MFD so i gather that's a coding job? Also was able to answer the call on the MFSW

Thanks again for you help Eddie-nl

[Eddie-NL]

it won't display on a red highline, unless you have a polar fis add on

Phone button only works with mk6 wheel

[rubbernut]

it won't display on a red highline, unless you have a polar fis add on

Phone button only works with mk6 wheel

It's a mk6 2010 (60) plate GTD so I have white highline, so think it will work?

[Eddie-NL]

sorry should have paid more attention.

Yes it should display and steering wheel phone button will work

If not then get address 77 added to the gateway installation list