Ive just run a full vagcom scan on my car as its due for MOT tomorrow. Theres a few codes showing up but one im particularly concerned about is the boost pressure. Heres the code its throwing up:
1 Fault Found:
000568 - Manifold Pressure / Boost Sensor (G31)
P0238 - 001 - Signal too High
Freeze Frame:
Fault Status: 01100001
Fault Priority: 0
Fault Frequency: 1
Reset counter: 255
Mileage: 166425 km
Time Indication: 0
Date: 2000.00.00
Time: 21:58:30
Freeze Frame:
RPM: 808 /min
Load: 16.9 %
Speed: 0.0 km/h
Temperature: 75.0°C
Temperature: 37.0°C
Absolute Pres.: 960.0 mbar
Voltage: 14.097 V
Ive read on a few forums that it can be an issue with the N75 valve and my car has done 103000miles. I also have the forge dv fitted which ive heard can through issues up. Any advice would be appreciated.