Make a donation

Author Topic: Hi guys my traction controll button does not want to switch off  (Read 564 times)

danielsh

  • Guest
Hi guys my traction controll button does not want to switch off..any ideas?

Offline da_ansa

  • Always Involved
  • ****
  • Thank You
  • -Given: 8
  • -Receive: 0
  • Posts: 153
    • Email
Re: Hi guys my traction controll button does not want to switch off
« Reply #1 on: August 07, 2015, 04:53:41 pm »
Are you pressing and holding down the button?

Offline AJP

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 392
  • -Receive: 316
  • Posts: 3212
Re: Hi guys my traction controll button does not want to switch off
« Reply #2 on: August 07, 2015, 07:38:15 pm »
This could be a faulty abs pump. It's well documented. Do a google. And good luck.

Offline doylebros

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 309
  • Posts: 2775
Re: Hi guys my traction controll button does not want to switch off
« Reply #3 on: August 07, 2015, 07:46:04 pm »
If as the above suggest you've got the common fault of G201
To make progress on this type of issue its best to have the vehicle scanned with a VCDS tool any of these near you:-

http://www.mk5golfgti.co.uk/forum/index.php/topic,88875.0.html

Then if the fault shows that code plenty dealers have corrected this issue FOC.

This is worth a read http://www.r32oc.com/topic/47215-fault-code-01435-g201-help-literature-needed/
« Last Edit: August 07, 2015, 08:02:36 pm by doylebros »

Offline fletch-

  • Taking part
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 2
  • Posts: 34
Re: Hi guys my traction controll button does not want to switch off
« Reply #4 on: August 07, 2015, 07:50:00 pm »
When I hold my traction button, it flashes rather than illuminates? It does turn it off though, is this right? 58 plate tdi

Offline RetroRaz

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 194
  • Posts: 2821
    • Email
Re: Hi guys my traction controll button does not want to switch off
« Reply #5 on: August 09, 2015, 11:06:39 pm »
Best way to check is get it scanned with vcds (vag com)